A transfer space of 60 inches (1524 mm) minimum by 60 inches (1524 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer platform surface and shall...
Search Results "Parking Surface"
-
11B-1009.5.2 Transfer space
-
§ 38.119(b)
doorways of cars not operating at lighted station platforms shall have outside lights which, when the door is open, provide at least 1 foot-candle of illumination on the station platform surface...
-
§ 38.81(c)
(c) The doorways of vehicles not operating at lighted station platforms shall have outside lights which provide at least 1 foot-candle of illumination on the station platform or street surface...
-
11B-407.4.6.2.1 Size and shape
Buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in their smallest dimension and be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
11B-1009.5.2 Transfer space
A transfer space of 60 inches (1524 mm) minimum by 60 inches (1524 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer platform surface and shall...
- Pilot Rock SRE Saddleback Bike Rack Embedded Mount
- Allegion aptiQmobile Credentials Mobile Application
-
Is DSA aware of existing precedents (potentially from past experience with non-EV accessible parking) to address the factors that would be considered to determine whether compliance with EV accessibility rules would be technically infeasible?
RESPONSE: A request for technical infeasibility is made to and determined by the local jurisdiction. A request for technical infeasibility is site-specific; therefore, there are no...
-
Bed Height Fact Sheet
An individual can arrive at a lodging facility where parking, check-in, restrooms, elevators, recreational centers, the path of travel to the room, and room amenities are all accessible-except...
-
Getting From Here to There—Outdoor Recreation Access Routes
Figure 36 shows an outdoor recreation access route connecting a parking lot and scenic overlook....
-
III-6.1000 General
The new floor must comply with, for example, ADAAG requirements for a nonslip surface or with the ADAAG carpeting requirements, if applicable....
-
Industry Standards
Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric) ASTM F 802-83(2003) Standard Guide for Selection of Certain Walkway Surfaces...
-
4. Organization of Technical Criteria
For example, X-ray equipment that is designed for use in a standing position for certain procedures would have to meet the technical criteria for slip resistant standing surface and standing...
-
Introduction
Environmental Access Golf Course Superintendents Association of America Hawaii Disability and Communication Access Board International Association of Amusement Parks...
-
Introduction
Environmental Access Golf Course Superintendents Association of America Hawaii Disability and Communication Access Board International Association of Amusement Parks...
-
Introduction
Environmental Access Golf Course Superintendents Association of America Hawaii Disability and Communication Access Board International Association of Amusement Parks...
-
Introduction
Environmental Access Golf Course Superintendents Association of America Hawaii Disability and Communication Access Board International Association of Amusement Parks...
-
Introduction
Environmental Access Golf Course Superintendents Association of America Hawaii Disability and Communication Access Board International Association of Amusement Parks...
-
Introduction
Environmental Access Golf Course Superintendents Association of America Hawaii Disability and Communication Access Board International Association of Amusement Parks...
-
11B-704.5 TTY shelf
The telephone handset shall be capable of being placed flush on the surface of the shelf....
-
704.5 TTY Shelf
The telephone handset shall be capable of being placed flush on the surface of the shelf....
-
1131A.2 Changes greater than ½ inch
Changes in level greater than ½ inch (12.7 mm) shall be made by means of a sloped surface not greater than 1 unit vertical in 20 units horizontal (5-percent slope), or a ramp, elevator or...
-
1013.1 General
Tent pads and tent platforms are defined spaces with prepared surfaces for setting up and securing tents....
-
I. Introduction
The purpose of this Minority Report is to make a formal recommendation for a minimum transfer surface low height of 19 inches for diagnostic imaging medical equipment....