The length of the transfer wall shall be 60 inches (1525 mm) minimum and shall be centered on the clear deck space. Figure 1009.4.3 Depth and Length of Transfer Walls...
Search Results "CDIHP: Center for Disability Issues and the Health Professions"
-
1009.4.3 Wall Depth and Length
-
608.2.2 Standard Roll-In Type Shower Compartments
Standard roll-in type shower compartments shall be 30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
-
407.4.7.2 Keypads
Keypads shall be identified by characters complying with 703.5 and shall be centered on the corresponding keypad button. The number five key shall have a single raised dot....
-
11B-503.3.3 Marking
The area within the borderlines shall be marked with hatched lines a maximum of 36 inches (914 mm) on center in a color contrasting with that of the aisle surface....
-
Captioning at sporting venues. (Section-by-Section Analysis)
Most disability advocacy organizations and individuals with disabilities complained that using size or seating capacity as a threshold for captioning safety and emergency information would...
-
Captioning at sporting venues. (Section-by-Section Analysis)
Most disability advocacy organizations and individuals with disabilities complained that using size or seating capacity as a threshold for captioning safety and emergency information would...
-
About this Guide
This guide explains requirements in the current editions of the ADA Standards issued by the Department of Justice (DOJ) and the Department of Transportation (DOT)....
-
1630.2(r) Direct Threat
(r) Direct Threat means a significant risk of substantial harm to the health or safety of the individual or others that cannot be eliminated or reduced by reasonable accommodation....
-
Social Security Act
The Act also outlines assistance to aged individuals, blind individuals, and dependent and “crippled” children, and it includes provisions for maternal and child health and welfare and the...
-
§1630.2(r) Direct Threat
(r) Direct Threat means a significant risk of substantial harm to the health or safety of the individual or others that cannot be eliminated or reduced by reasonable accommodation....
-
5. Exception from the Requirements of M302 for Weight Scales with Integral Seats
See MDE Advisory Committee Report, 66, available at https://www.access-board.gov/guidelines-and-standards/health-care/about-this-rulemaking/advisory-committee-final-report. ...
-
§382.15(b)(2)
(2) The assurance must also commit the contractor to implementing directives issued by your CROs under §§382.151 through 382.153....
-
12186(a)(2)(B)(iii) Effective period
(iii) Effective period Subject to section 12185(d) of this title, the regulations issued pursuant to this subparagraph shall take effect...
-
Platform to Hoistway Clearance: ADA Standard Section 407.4.3
Section 407.4.3 covers the current ADA Standards for the required clearance between the elevator car platform and the hoistway landing.
-
COSTS TO LOWER MINIMUM TABLE HEIGHT
COSTS TO LOWER MINIMUM TABLE HEIGHT To be useful for its intended purpose, examination tables and chairs must maintain a high height of at least 32 inches, so that the health care provider...
-
F234 Residential Facilities
As discussed above in section 233, the Board has sought to ensure consistency between the requirements of this rule and regulations for housing issued by HUD....
-
36 CFR Part 1191 ADA and ABA Accessibility Guidelines for Emergency Transportable Housing Units
Published in the Federal Register May 7, 2014. 36 CFR Part 1191 RIN 3014-AA39 Americans With Disabilities Act (ADA) and Architectural Barriers Act (ABA) Accessibility Guidelines;...
-
National Technical Assistance Center on Blindness and Visual Impairment
The National Technical Assistance Center on Blindness and Visual Impairment (NTAC-BVI) is the place to go to get information about hiring, retaining and promoting your employees who have...
-
Scope: ADA Standard Section 301.1
Sections 301.1 of the ADA Standards covers scoping requirements for Chapter 3 and the Building Blocks of the ADA Standards.
-
Floor Requirement: ADA Standard Section 217.4.2
Section 217.4.2 covers scoping requirements in the current ADA Standards for TTYs on the floor of public and private buildings.
-
General: ADA Standard Section 610.1
Section 610.1 of the ADA Standards covers information in the current ADA Standards for seats in bathtubs and shower compartments.
-
Building Requirement: ADA Standard Section 217.4.3
Section 217.4.3 covers scoping requirements in the current ADA Standards for TTYs on the floor of public and private buildings.
-
11B-103 Equivalent facilitation
With the exception of transit facilities, which are covered by regulations issued by the Department of Transportation, there is no process for certifying that an alternative design provides...
-
EXHIBIT C Certification of ADA Compliance
QuikTrip Corporation, Hereby CERTIFY as follows: I have been trained regarding the Americans with Disabilities Act (ADA) and procedures for certification of ADA compliance by the Independent...
