consumption by customers seated on stools or standing at the counter, a portion of the main counter which is 60 in (1525 mm) in length minimum shall be provided in compliance with 4.32 or service...
Search Results "Web-Based Service"
Filters
Commonly Searched Documents
-
5.2 Counters and Bars
-
Maintenance of Accessible Features
s regulations require that features of facilities and equipment required to be accessible be maintained in operable working condition, except for isolated or temporary interruptions in service...
-
§ 37.37(h)
(h) Private rail systems providing fixed route or specified public transportation service are subject to the requirements of §37.107 with respect to the acquisition of rail passenger cars...
-
§ 35.140(b)(2)
the Rehabilitation Act of 1973, as established by the regulations of the Department of Justice in 28 CFR part 41, as those requirements pertain to employment, apply to employment in any service...
-
Public entity
instrumentality of a State or States or local government; and (3) The National Railroad Passenger Corporation, and any commuter authority (as defined in section 103(8) of the Rail Passenger Service...
-
§ 37.201(b)
controls the facility at which a rest or intermediate stop is made, or if an OTRB operator contracts with the person who owns, leases, or controls such a facility to provide rest stop services...
-
F221.2.1.3 Other Boxes
The number of wheelchair spaces required in boxes covered by F221.2.1.3 is calculated based on the total number of seats provided in these other boxes....
-
Medical facilities
Similarly, a building code organization noted that its percentage requirements for accessible units is based on what occurs in the space, not on the building type....
-
406 Curb Ramps
This supplement will be proposed for public comment based on recommendations from the Board’s Public Rights-of-Way Access Advisory Committee, which was comprised of representatives from...
-
Different "Types"
Different "types" of play components are based on the general experience provided by the play component....
-
Q5.) What dimensions and conditions can practitioners reasonably consider to be compliant when the conditions, as constructed, do not meet the technical requirements exactly and there are no official, published, industry-developed tolerances?
Without official guidance but based on an analysis of the capabilities of the materials and processes, David Ballast generally recommends a tolerance of 0.5% in the cross slope direction...
-
221.2.1.3 Other Boxes
The number of wheelchair spaces required in boxes covered by 221.2.1.3 is calculated based on the total number of seats provided in these other boxes....
-
R214 On-Street Parking Spaces
Where parking on part of the block perimeter is altered, the minimum number of accessible parking spaces required is based on the total number of marked or metered parking spaces on the...
-
Study Objectives
Define population-based percentiles for: a....
-
Eunice Noell-Waggoner, IES, LC. Value, Contrast and Reflections
These edited Proceedings are based on notes by JEW and TOS, and slides that accompanied the presentation) Exterior Considerations (slides 2 and 3) Contrast is needed at ramps &...
-
Resources
Psychiatric Association, 2013. http://www.psychiatry.org/advocacy-- newsroom/newsroom/reporting-on-mental-illness Content was developed by the ADA Knowledge Translation Center, and is based...
-
221.2.1.3 Other Boxes
The number of wheelchair spaces required in boxes covered by 221.2.1.3 is calculated based on the total number of seats provided in these other boxes....
-
Obligations of the Department
The Department will provide assistance to the Board on devising and using a new survey instrument that will be based on the Department's ADA Checklist for Polling Places (June 2016) and...
-
Pulse Duration and Flash Rate
A flash rate cycle between one to three Hz (flashes per second) is required based on research results. Recommendation: Flash synchronization is an important consideration....
-
Mounting Height
The 80 inch height is based on research indicating it to be the most effective for a 75 cd lamp....
-
2.2 Key Measurement Variables and Procedures
2.2 Key Measurement Variables and Procedures We selected measurement variables and procedures for measurements based on advice provided by experts in anthropometry and ergonomics, human...
-
Clear Floor Space: Minimum Clear Floor Space Required for Forward and Side Approach - Manual Wheelchair
The dimensions of clear floor area are based on four anthropometry dimensions....
-
Clear Floor Space: Minimum Clear Floor Space Required for Forward and Side Approach - Scooter
The dimensions of clear floor area are based on four anthropometry dimensions....
-
Clear Floor Space: Minimum Clear Floor Space Required for Forward and Side Approach - Power Chair
The dimensions of clear floor area are based on four anthropometry dimensions....