A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
Search Results "Warning Curb"
Filters
Commonly Searched Documents
-
11B-406.3.2 Turning space
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
-
Obstructions [4.7.8]
At curb ramps, a landing provides the necessary connection to an accessible route. A landing with a minimum length of 48 inches will provide sufficient turning space....
-
R305.2.4 Pedestrian Refuge Islands
At cut-through pedestrian refuge islands, detectable warning surfaces shall be placed at the edges of the pedestrian island and shall be separated by a 610 mm (2.0 ft) minimum length of...
-
11B-705.1.1.3 Color and contrast
Detectable warning surfaces shall comply with Section 11B-705.1.1.3.1. The material used to comply with this section shall be an integral part of the detectable warning surface....
-
11B-406.2.1 Slope
Ramp runs shall have a running slope not steeper than 1:12.
-
11B-406.2.1 Slope
Ramp runs shall have a running slope not steeper than 1:12.
-
11B-406.2.1 Slope
Ramp runs shall have a running slope not steeper than 1:12.
-
11B-705.3 Product Approval
Only approved DSA-AC detectable warning products and directional surfaces shall be installed as provided in the California Code of Regulations (CCR), Title 24, Part 1, Chapter 5, Articles...
-
11B-705.3 Product Approval
Only approved DSA-AC detectable warning products and directional surfaces shall be installed as provided in the California Code of Regulations (CCR), Title 24, Part 1, Chapter 5, Articles...
-
11B-705.3 Product Approval
Only approved DSA-AC detectable warning products and directional surfaces shall be installed as provided in the California Code of Regulations (CCR), Title 24, Part 1, Chapter 5, Articles...
-
11B-250.1 General
Exceptions: Curb ramps and blended transitions with detectable warnings complying with Section 11B-247 may be used to connect raised circulation paths and pedestrian crossings within...
-
Width [4.7.3] and Surface [4.7.4]
The minimum clear width of a curb ramp is 36 inches, exclusive of flared sides....
-
Why is a top landing required at curb ramps if side flares are provided?
A landing at least 36” long at the top of curb ramps provides room to approach or exit ramps and turn without encountering compound slopes of flared sides....
-
11B-705.1.2.5 Hazardous vehicular areas
Detectable warnings at hazardous vehicular areas shall be 36 inches (914 mm) in width....
-
DSA Drawing 11B-406.6-1 Raised Island next to Curbs and Gutters (2016 CBC)
Requires the Premium User plan or above. (Login or upgrade your account!) -
Armor-Tile Tactile Systems Surface Applied Systems Installation Video
This is a video demonstrating how to install a single Armor Tile surface-applied tile. Our truncated dome tactile systems are designed with safety and convenience in mind and are...
-
K. SIDEWALKS
the ILA and the United States its written process for requesting and receiving input from people with disabilities regarding the accessibility of its sidewalks, including requests to add curb...
-
K. SIDEWALKS
the ILA and the United States its written process for requesting and receiving input from people with disabilities regarding the accessibility of its sidewalks, including requests to add curb...
-
11B-705.1.2.5 Hazardous vehicular areas
Detectable warnings at hazardous vehicular areas shall be 36 inches (914 mm) in width....
-
7 [§ 4.7.8]
7 [§ 4.7.8] Curb ramps must be located where they will not be obstructed by parked vehicles....
-
Q3: Roadway Resurfacing Alteration Project and Curb Ramp Improvements
Q3: If a roadway resurfacing alteration project does not span the full width of the road, do I have to put in curb ramps?...
-
Top Landings
Commenters advised that landings should be specified at the top of curb ramps. Response....
-
Figure 405.9.2 Curb or Barrier Edge Protection – Drawing from the U.S. Access Board
