Objects are permitted to protrude a distance of 6 inches (152 mm) maximum along the front of the wheelchair space, where located 9 inches (229 mm) minimum and 27 inches (686 mm) maximum...
Search Results "Manual Wheelchair"
-
11B-1002.4.4.3 Permitted protrusions in wheelchair spaces
-
11B-1002.4.4.3 Permitted protrusions in wheelchair spaces
Objects are permitted to protrude a distance of 6 inches (152 mm) maximum along the front of the wheelchair space, where located 9 inches (229 mm) minimum and 27 inches (686 mm) maximum...
-
5.8.1.1 Clear Platform Size Recommendation
The Wheeled Mobility Anthropometry Project recommends this platform dimension.iv These study findings noted that a 36-inch length accommodates standard manual and power wheelchairs and most...
-
"Other Power-Driven Mobility Device" and "Wheelchair" (Section-by-Section Analysis)
‘‘Other Power-Driven Mobility Device'' and ‘‘Wheelchair'' (Section-by-Section Analysis) Because relatively few individuals with disabilities were using nontraditional mobility devices...
-
American Standard Exposed Manual Top Spud Urinal 0.5 gpf Flush Valve 6045.051
-
1009.3 Sloped Entries
Personal wheelchairs and mobility devices may not be appropriate for submerging in water....
-
1009.3 Sloped Entries
Personal wheelchairs and mobility devices may not be appropriate for submerging in water....
-
11B-1009.3 Sloped entries
Personal wheelchairs and mobility devices may not be appropriate for submerging in water....
-
11B-1009.3 Sloped entries
Personal wheelchairs and mobility devices may not be appropriate for submerging in water....
-
11B-1009.3 Sloped entries
Personal wheelchairs and mobility devices may not be appropriate for submerging in water....
-
1009.3 Sloped Entries
Personal wheelchairs and mobility devices may not be appropriate for submerging in water....
-
M303.2.3 Depth
Where wheelchair spaces can be entered from the front or rear, the wheelchair space shall be 48 inches (1220 mm) deep minimum....
-
M303.2.3 Depth (Section-by-Section Analysis)
The MDE NPRM proposed two wheelchair space depth requirements based on how the wheelchair user enters the space: for spaces entered from the front or rear, 48 inches deep minimum; and for...
-
T602.4 Size
Wheelchair spaces shall be 30 inches (760 mm) minimum in width and 48 inches (1220 mm) minimum in length....
-
11B-206.7.2 Wheelchair spaces
Platform lifts shall be permitted to provide an accessible route to comply with the wheelchair space dispersion and line-of-sight requirements of Sections 11B-221 and 11B-802....
-
Categorization of wheelchair versus other power-driven mobility devices. (Section-by-Section Analysis)
Categorization of wheelchair versus other power-driven mobility devices....
-
Integration
Under section 221.2.2, wheelchair spaces must be integrated throughout seating areas....
-
Whitehall Mfg. Ligature-Resistant Box with Hydraulic Flush Valve for Top Supply ADA Toilet
WH2802-SLPT-ADA Series Providing a ligature resistant solution, a top supply hydraulic toilet flush valve is covered by stainless steel box with a sloped top. Holes are provided...
-
Behavioral Safety Products #FV600 Ligature Resistant Flush Valve Cover
This one piece unit has a fixed width, and can simply be offset to the opposite side of the lever handle. The bottom can be left intact and mounted at existing height, or can be cut...
-
2. In § 37.3, add the definition “Direct threat” and revise the definition “Wheelchair” to read as follows
In § 37.3, add the definition “Direct threat” and revise the definition “Wheelchair” to read as follows:...
-
Categorization of wheelchair versus other power-driven mobility devices. (Section-by-Section Analysis)
Categorization of wheelchair versus other power-driven mobility devices....
-
1002.5.4 Wheelchair Storage Space
Wheelchair storage spaces complying with 305 shall be provided in or adjacent to unload areas for each required amusement ride seat designed for transfer and shall not overlap any required...
-
1002.5.4 Wheelchair Storage Space
Wheelchair storage spaces complying with 305 shall be provided in or adjacent to unload areas for each required amusement ride seat designed for transfer and shall not overlap any required...
-
Dispersion Requirements
In the proposed rule, the Board posed several questions concerning the requirements for the dispersion of wheelchair spaces (which were located in section 802.6)....
