In the raised position, the centerline of the seat shall be located over the deck and 16 inches (406 mm) minimum from the edge of the pool....
Search Results "L-Shaped Seat"
Filters
Commonly Searched Documents
-
11B-1009.2.2 Seat location
-
Bradley Partition Mounted Seat Cover Dispenser 582
Partition Mounted Serves two compartments Satin finish stainless steel 1,000 capacity
-
Bradley Surface Mounted Seat Cover Dispenser 5831
Surface Mounted Satin finish Stainless Steel 250 Capacity BradEX
-
Armrests: ADA Standard Section 802.4.1
Where armrests are provided on the seating in the immediate area, folding or retractable armrests shall be provided on the aisle side of the seat....
-
11B-802.4.1 Armrests
Where armrests are provided on the seating in the immediate area, folding or retractable armrests shall be provided on the aisle side of the seat....
-
§382.87 What other requirements pertain to seating for passengers with a disability?
[See subsections ...]
-
4.26.1* GENERAL
All handrails, grab bars, and tub and shower seats required to be accessible by 4.1, 4.8, or 4.9 shall comply with 4.26....
-
11B-1002.4.7 Companion seats
Where the interior width of the amusement ride is greater than 53 inches (1346 mm), seating is provided for more than one rider, and the wheelchair is not required to be centered within...
-
11B-1009.2.2 Seat location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (406 mm) minimum from the edge of the pool....
-
11B-1002.4.7 Companion seats
Where the interior width of the amusement ride is greater than 53 inches (1346 mm), seating is provided for more than one rider, and the wheelchair is not required to be centered within...
-
11B-1009.2.2 Seat location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (406 mm) minimum from the edge of the pool....
-
11B-1002.4.7 Companion seats
Where the interior width of the amusement ride is greater than 53 inches (1346 mm), seating is provided for more than one rider, and the wheelchair is not required to be centered within...
-
4.26.1* General
All handrails, grab bars, and tub and shower seats required to be accessible by 4.1, 4.8, 4.9, 4.16, 4.17, 4.20 or 4.21 shall comply with 4.26....
-
5.3.3.1 Height
The total height of the toilet seat on the riser for a pit toilet shall be between 17 inches (430 mm) and 19 inches (485 mm) above the floor or ground surface....
-
11B-221.4 Designated aisle seats
At least 5 percent of the total number of aisle seats provided shall comply with Section 11B-802.4 and shall be the aisle seats located closest to accessible routes....
-
Seating Solutions ADA Platforms, Ramps & Stairs
We provide modular stages and custom ramps, staircases and ADA lifts throughout temporary venues. We will design and build to meet your specific requirements. Product...
-
11B-221.1 General
Assembly areas shall provide wheelchair spaces, companion seats, designated aisle seats and semi-ambulant seats complying with Sections 11B-221 and 11B-802....
-
11B-221.1 General
Assembly areas shall provide wheelchair spaces, companion seats, designated aisle seats and semi-ambulant seats complying with Sections 11B-221 and 11B-802....
-
11B-221.1 General
Assembly areas shall provide wheelchair spaces, companion seats, designated aisle seats and semi-ambulant seats complying with Sections 11B-221 and 11B-802....
-
Seating Locations
Seating Locations: Set up the meeting room to provide access to all participant seating locations, the speakers' area, and refreshments....
-
6.4
6.4 Wheelchair locations and companion seats shall be aligned horizontally so that they are shoulder-to-shoulder with each other and with other seats in the same row....
-
Bradley Contemporary Series Recess Mounted Seat Cover Dispenser 5847
Recessed Mounted Contemporary Series Satin finish Stainless Steel 500 Capacity BradEX
-
Bradley High Capacity Surface Mounted Seat Cover Dispenser 583
Surface Mounted Satin finish Stainless Steel 500 Capacity BradEX
