T-shaped space can be provided within bedside clearances. Turning space (60 inch diameter circle) is recommended between beds to allow additional maneuvering and transfer space....
Search Results "ITU-T: International Telecommunications Union Telecommunications Standardization Sector"
Filters
Commonly Searched Documents
-
Bedside Clearances
-
809.2.2 Turning Space
If designers elect to provide clear floor space that is at least 36 inches (915 mm) wide, as opposed to the required 30 inches (760 mm) wide, that clearance can be part of a T-turn, thereby...
-
809.2.2 Turning Space
If designers elect to provide clear floor space that is at least 36 inches (915 mm) wide, as opposed to the required 30 inches (760 mm) wide, that clearance can be part of a T-turn, thereby...
-
809.2.2 Turning Space
If designers elect to provide clear floor space that is at least 36 inches (915 mm) wide, as opposed to the required 30 inches (760 mm) wide, that clearance can be part of a T-turn, thereby...
-
How to Use the ADA 2010 Standards Electronic Pocket Guide
-
1017.4.1 Size
The intersection of two trails providing a T-shaped space complying with 304.3.2 where the base and the arms of the T-shaped space extend 48 inches (1220 mm) minimum beyond the intersection...
-
1017.4.1 Size
The intersection of two trails providing a T-shaped space complying with 304.3.2 where the base and the arms of the T-shaped space extend 48 inches (1220 mm) minimum beyond the intersection...
-
Section 1630.10 Qualification Standards, Tests, and Other Selection Criteria
Section 1630.10 Qualification Standards, Tests, and Other Selection Criteria...
-
11B-809.2.2 Turning space
If designers elect to provide clear floor space that is at least 36 inches (915 mm) wide, as opposed to the required 30 inches (760 mm) wide, that clearance can be part of a T-turn, thereby...
-
11B-809.2.2 Turning space
If designers elect to provide clear floor space that is at least 36 inches (915 mm) wide, as opposed to the required 30 inches (760 mm) wide, that clearance can be part of a T-turn, thereby...
-
11B-809.2.2 Turning space
If designers elect to provide clear floor space that is at least 36 inches (915 mm) wide, as opposed to the required 30 inches (760 mm) wide, that clearance can be part of a T-turn, thereby...
-
Receiver Jacks: ADA Standard Section 706.2
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
Roll-in Access [1014.2.2]
When roll-in access is provided, a turning space at least 60 inches in diameter or a T-shaped space with an arm at least 60 by 36 inches and a base at least 36 inches wide and 24 inches...
-
Accessible Means of Egress Excerpts from 2000 INTERNATIONAL BUILDING CODE®
COPYRIGHT© 2000 by INTERNATIONAL CODE COUNCIL, INC. Thirteenth Printing: December 2005 Accessible Means of Egress Excerpts...
-
Chapter 7: Referenced Standards
[See subsections ...]
-
The Roles of the Access Board and the Department of Justice
The ADA requires the Department to issue regulations that include enforceable accessibility standards applicable to facilities subject to title II or title III that are consistent with the...
-
1005.2.1 Height
EXCEPTION: Where a guard complying with sections 1003.2.12.1 and 1003.2.12.2 of the International Building Code (2000 edition) or sections 1012.2 and 1012.3 of the International Building...
-
1005.2.1 Height
EXCEPTION: Where a guard complying with sections 1003.2.12.1 and 1003.2.12.2 of the International Building Code (2000 edition) or sections 1012.2 and 1012.3 of the International Building...
-
1005.2.1 Height
EXCEPTION: Where a guard complying with sections 1003.2.12.1 and 1003.2.12.2 of the International Building Code (2000 edition) or sections 1012.2 and 1012.3 of the International Building...
-
C. Designation of Accessible Vehicles
The International Symbol of Accessibility should be displayed as shown in Figure 6....
-
23. Q: We are going to build a new facility. What architectural standards do we have to follow to make sure that our facility is accessible to people with disabilities?
What architectural standards do we have to follow to make sure that our facility is accessible to people with disabilities?...
-
APPENDIX A: Federal Trail Data Standards (FTDS) – Trail Fundamentals
11/08/2011 Trail Type ◼ Trail Class ◼ Managed Use ◼ Designed Use The Federal Trail Fundamentals include four concepts that are the cornerstones of effective trail...
-
34 CFR Part 104 Discrimination on the Basis of Disability in Federally Assisted Programs and Activities - Notice of interpretation
II ADA Standards) except that Exception (1) to Section 206.2.3 does not apply....