Glass-walled shower stalls shall provide reinforcement for installation of floor-mounted or ceiling-mounted grab bars....
Search Results "Alternate Stall"
-
11B-809.10.6.4 Reinforcement for grab bars
-
4.17.4 Toe Clearances
In standard stalls, the front partition and at least one side partition shall provide a toe clearance of at least 9 in (230 mm) above the floor....
-
4.21.7 CURBS
If provided, curbs in shower stalls 36 in by 36 in (915 mm by 915 mm) shall be no higher than 1/2 in (13 mm)....
-
4.17.4 TOE CLEARANCES
In standard stalls, the front partition and at least one side partition shall provide a toe clearance of at least 9 in (230 mm) above the floor....
-
4.21.7 Curbs
If provided, curbs in shower stalls 36 in by 36 in (915 mm by 915 mm) shall be no higher than 1/2 in (13 mm)....
-
11B-502.4 Floor or ground surfaces
Where two parking stalls share the same access aisle, a full depth aisle is required; in diagonal parking, the geometric layout will require additional access aisle depth to satisfy the...
-
11B-502.4 Floor or ground surfaces
Where two parking stalls share the same access aisle, a full depth aisle is required; in diagonal parking, the geometric layout will require additional access aisle depth to satisfy the...
-
G. Compartment Size
If the accessible toilet is in a stall, does the stall measure at least 60" wide and 56" deep if it is wall mounted or 59" deep if it is floor mounted to allow persons who use wheelchairs...
-
11. Toilet rooms and bathing facilities
Toilet rooms and bathing facilities (including water closets, toilet rooms and stalls, urinals, lavatories and mirrors, bathtubs, shower stalls, and sinks.) 4.22 Where provided in...
-
V. Description of Steps Taken to Minimize the Significant Economic Impact Consistent with the Stated Objectives and Significant Alternatives Considered and Rejected.
Description of Steps Taken to Minimize the Significant Economic Impact Consistent with the Stated Objectives and Significant Alternatives Considered and Rejected....
-
AJW Architectural Products U842 Dual Stall Hooded Toilet Tissue Dispenser w/Auto Reserve - Partition Mounted - Non-Controlled
Product Features Fabricated of #22 gauge stainless steel with a #4 satin finish. Holds two standard toilet tissue rolls. Partition Mounted Toilet Tissue...
-
H15
Is at least one wide toilet stall provided with an out swinging door, side and rear grab bars, and clear space next to the toilet?...
-
4.21.3 SEAT
A seat shall be provided in shower stalls 36 in by 36 in (915 mm by 915 mm) and shall be as shown in Fig. 36....
-
Pilot Rock BS Series Bike Stand
BS Series Bike Stands provide stalls on 16” centers (on same side) to fit most bicycles. Model BS-3SS: 2 ft.-10 in. long, parks 3 bikes, using one side....
-
4.34.5.5(2) Seat
A seat shall be provided in the shower stall in Fig. 35(a) as shown in Fig. 36....
-
Sec.36.304(b)(12)
(12) Installing grab bars in toilet stalls;...
-
§ 36.304(b)(12)
(12) Installing grab bars in toilet stalls;...
-
4.21.1* General
Accessible shower stalls shall comply with 4.21....
-
1.9.1.1.4
Some construction such as parking lot resurfacing, re-striping parking stalls, sidewalk repair and cabinet installations do not always require building permits....
-
1.9.1.1.4
Some construction such as parking lot resurfacing, re-striping parking stalls, sidewalk repair and cabinet installations do not always require building permits....
-
4.17.2 Water Closets
Water closets in accessible stalls shall comply with 4.16....
