5.8.2.6 Clearance Depth at Toe Height Above the Ground. The toe clearance depth should be 22 inches minimum at toe height.
Search Results "Lavatory Clear Floor Space"
-
5.8.2.6 Clearance Depth at Toe Height Above the Ground
-
5.8.3 Breast Platform
5.8.3 Breast Platform
-
5.8.2.6 Clearance Depth at Toe Height above the ground Recommendation
5.8.2.6 Clearance Depth at Toe Height above the ground Recommendation The Committee recommends 22 inches minimum clearance depth at toe height. Rationale for...
-
§ 35.151(g)(1)
(1) Wheelchair and companion seating locations are dispersed among all levels of the facility that are served by an accessible route;
-
§ 36.302(f)(8) Prevention of fraud in purchase of tickets for accessible seating
(8) Prevention of fraud in purchase of tickets for accessible seating. A public accommodation may not require proof of disability, including, for example, a doctor's note, before...
-
Figure M6: M303.2.4 Knee and Toe Clearance
[See subsections ...]
-
§ 35.138 Ticketing.
[See subsections ...]
-
4.1.2(5)(b)
(b) One in every eight accessible spaces, but not less than one, shall be served by an access aisle 96 in (2440 mm) wide minimum and shall be designated “van accessible” as required by 4.6.4...
-
Section B: Passenger Drop-Off Area
Yes No N/A Comments/Remedies B1 Is the vehicle pull-up space on a level surface, with slopes not exceeding 1:48 in all directions?...
-
Minimum Clear Corridor Width
A few commenters from the disability community advocated a minimum clear corridor width of 48 inches....
-
Clear Width [4.8.3]
A maximum clear width is not specified....
-
11B-409.3.2 Location
Elevator car doors or gates shall be positioned at the narrow end of the clear floor spaces required by Section 11B-409.4.1....
-
11B-409.3.2 Location
Elevator car doors or gates shall be positioned at the narrow end of the clear floor spaces required by Section 11B-409.4.1....
-
407.4.8.1.3 Floor Arrival
407.4.8.1.3 Floor Arrival. As the car passes a floor and when a car stops at a floor served by the elevator, the corresponding character shall illuminate....
-
Mirrors: ADA Standard Section 603.3
Section 603.3 covers the current ADA Standards for mirrors in toilet and bathing rooms.
-
11B-603.3 Mirrors
Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 40 inches (1016 mm) maximum above the finish floor or ground....
-
11B-603.3 Mirrors
Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 40 inches (1016 mm) maximum above the finish floor or ground....
-
M102.1 Defined Terms (Section-by-Section Analysis)
decided to add six additional terms to this section; end transfer surface, examination chair, imagining [sic] equipment with bores, imagining [sic] bed, side transfer surface, and wheelchair space...
-
F217.4.2 Floor Requirement
Where at least one public pay telephone is provided on a floor of a building, at least one public TTY shall be provided on that floor....
-
M305.3.1 Length (Section-by-Section Analysis)
The MDE Advisory Committee supported the proposed technical provisions, but recommended adding additional criteria for standing supports on raised platforms with wheelchair spaces....
-
Methods for Placing a Slope Tool on the Surface
There are several methods that can be used for measuring slopes and cross slopes with a digital slope meter. Each method has advantages and disadvantages.
-
Maps/floor plans
Maps/floor plans: b. Provide at the front desk tactile maps of the Museum and floor plan that visitors can borrow. See 28 C.F.R. § 36.303....