There is ongoing research, development, and validation to design an apparatus capable of measuring surface roughness of sidewalks....
Search Results "Outdoor Developed Areas"
-
Future Work
-
Three-Point Turn
The AASHTO Guide for the Development of Bicycle Facilities (pp. 35-36) recommends a minimum paved width of 300 cm (120 inches) for a two-way shared use path.(2) Table 18 shows that the mean...
-
2.3(b) Job Analysis and the "Essential Functions" of a Job
This type of job analysis is used to develop selection criteria for various jobs....
-
Readily achievable (Advisory Guidance)
On the other hand, a given solution might be so similar to the current design, development and fabrication process that it is readily achievable to implement it virtually overnight....
-
EMERGENCY PREPAREDNESS AND RECOVERY
, and toilet rooms to the shelter area comply with the Standards....
-
APPENDIX A
/ crumb rubber; unitary rubber mat surfaces; unitary rubber “poured in place” surfaces; loose fill material used with a binding product; or combination or hybrid surface systems under development...
-
Elevated Play Components
Play areas with 20 or more elevated components must use ramps to connect a minimum of 25 percent of those components. ...
-
704.2 Projections
Cornices, eave overhangs, exterior balconies and similar architectural appendages extending beyond the floor area shall conform to the requirements of this section or Section 1406....
-
Elements Not Addressed in Final Rule
The proposed rule included proposed scoping and technical requirements for recreational vehicle parking spaces in general parking areas at camping facilities....
-
Orienting Attendees to the Meeting Space
This may include “big picture” information – the layout of the facility and surrounding area, including landmarks and their relation to each other, for example – or information on a smaller...
-
§ 38.83(a)(1) General
., lift, ramp or bridge plate) complying with either paragraph (b) or (c) of this section and sufficient clearances to permit at least two wheelchair or mobility aid users to reach areas...
-
III. Handrails and Stanchions
addition to the requirements for handrails and stanchions for rapid, light, and commuter rail vehicles, consideration should be given to the proximity of handrails or stanchions to the area...
-
Location of Accessible Routes
The 2010 Standards require all accessible routes to coincide with or be located in the same general area as general circulation paths....
-
Different "Types"
Different "Types" At least one of each type of play component provided at ground level in a play area must be on the accessible route. ...
-
Symbols of Accessibility [4.30.7]
non-glare finishes system-wide uniformity The International Symbol of Accessibility is used to label accessible: parking spaces check-out aisles [7.3] areas...
-
Clear Floor Space: Minimum Clear Floor Space Required for Forward and Side Approach - Manual Wheelchair
This data depicts the amount of clear floor area required by persons using wheeled mobility devices when performing a forward or side reach to a target location (e.g., reaching to a...
-
Clear Floor Space: Minimum Clear Floor Space Required for Forward and Side Approach - Scooter
This data depicts the amount of clear floor area required by persons using wheeled mobility devices when performing a forward or side reach to a target location (e.g., reaching to a...
-
Clear Floor Space: Minimum Clear Floor Space Required for Forward and Side Approach - Power Chair
This data depicts the amount of clear floor area required by persons using wheeled mobility devices when performing a forward or side reach to a target location (e.g., reaching to a...
-
Egress Signage
Section 216.4 provides specific requirements for means of egress, including exit doors, areas of refuge, and directional signs....
- TechniSoil G3® Pathway Liquid Polymer Stabilizer
- Takeform Fusion Signage Office/Suite/Room Identification Type F
- Takeform Fusion Signage Office/Suite/Room Identification Type G
- Takeform Fusion Signage Office/Suite/Room Identification Type G.2
- Bobrick Recessed Heavy Duty Specimen Pass-Through Cabinet B-50516