Ramps and curb ramps, which must be used to span vertical changes greater than ½”, must have level landings and clearances at the tops and bottoms of each run to provide adequate separation...
Search Results "AHJ: Authority Having Jurisdiction"
Filters
Commonly Searched Documents
-
Is there a minimum distance between changes in level?
-
16(a)(vii)
(vii) Any non-valet parking facilities owned or operated by the hotel have the number of accessible car and van-accessible parking spaces required by the ADA Standards and comply with the...
-
Do requirements of accessible means of egress apply to employee work areas?
Employee work areas also must include wiring for visible alarms if they are served by audible alarms, and those that are 1,000 square feet or more must have compliant common use circulation...
-
Two-Way Communication Systems [§230 and §708]
Lighted signals should have labels to indicate their meaning. If handsets are provided, cords must be at least 29” long....
-
1193.33(c) (Advisory Guidance)
Such staff should also have basic information on how to handle TTY and relay calls....
-
Video Description (Advisory Guidance)
telecommunications equipment and customer premises equipment need to make their videos accessible to persons who are deaf or hard of hearing, they must also be accessible to persons who are blind or have...
-
§ 35.136(d) Animal under handler's control
A service animal shall have a harness, leash, or other tether, unless either the handler is unable because of a disability to use a harness, leash, or other tether, or the use of a harness...
-
1.9.1.8 Adopting agency identification
ETA Editor's Note Sections from the California Building Code Chapter 1 that are not adopted by Division of the State Architect - Access Compliance (DSA-AC) have been omitted....
-
11B-1009.3 Sloped entries
Some may have batteries, motors, and electrical systems that when submerged in water may cause damage to the personal mobility device or wheelchair or may contaminate the pool water....
-
11B-407.2.1.2 Size and shape
Call buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
§ 37.135(c)(1)
Entities that have submitted a joint plan under §37.141 may submit a joint certification under this paragraph....
-
KICK PLATE
Although kick plates are not necessarily required by the code, they are often applied to areas of doors required to have a smooth surface and be free of abrupt surface changes....
-
206.3 Location--Modification to 206.3 of Appendix B to 36 CFR Part 1191
devices, fare vending or other ticketing areas, and fare collection areas shall be placed to minimize the distance which wheelchair users and other persons who cannot negotiate steps may have...
-
11B-1009.2.6 Footrests and armrests
The seat shall have two armrests. The armrest positioned opposite the water shall be removable or shall fold clear of the seat when the seat is in the raised position....
-
11B-407.4.7.2 Keypads
The number five key shall have a single raised dot....
-
907.5.2.3.3 Group R-2
In Group R-2 occupancies required by Section 907 to have a fire alarm system, all dwelling units and sleeping units shall be provided with the capability to support visible alarm notification...
-
II-7.3200 911 lines
Where such a separate line is provided, callers using TDD's or computer modems would have the option of calling either 911 or the seven-digit number....
-
II-4.3300 Nondiscrimination in selection criteria and the administration of tests
Public entities may not use employment selection criteria that have the effect of subjecting individuals with disabilities to discrimination....
-
II-6.6000 Curb ramps
When streets, roads, or highways are newly built or altered, they must have ramps or sloped areas wherever there are curbs or other barriers to entry from a sidewalk or path....
-
11B-407.2.1.2 Size and shape
Call buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-703.5.1 Finish and contrast
Characters and their background shall have a non-glare finish....
-
KICK PLATE
Although kick plates are not necessarily required by the code, they are often applied to areas of doors required to have a smooth surface and be free of abrupt surface changes....
-
11B-703.7.1 Finish and contrast
Symbols of accessibility and their background shall have a non-glare finish....
-
11B-1009.3 Sloped entries
Some may have batteries, motors, and electrical systems that when submerged in water may cause damage to the personal mobility device or wheelchair or may contaminate the pool water....