For example, where a municipal zoning ordinance requires a set-back of 12 feet from the curb in the central business district, installing a ramp to ensure access for people who use wheelchairs...
Search Results "Ramp Surface"
-
Issue: Local Laws, Ordinances, and Regulations
-
a) Aquatic Program
program access, namely: (1) an accessible route from the property line to the building; (2) an accessible entry; (3) an accessible check-in counter; (4) accessible signage; (5) accessible ramps...
-
106.5.41 Path of Travel
An accessible path of travel may consist of walks and sidewalks, curb ramps and other interior or exterior pedestrian ramps; clear floor paths through lobbies, corridors, rooms, and other...
-
Design Criteria for the Transfer Station
10" and 43” Horizontal distance (gap) between platform 1 and platform 2 0” for the adjacent two-step transfer 8” for the two-step transfer with ramp...
-
Interacting with People with Physical Disabilities
When moving up or down steps, steep ramps, or curbs, ask wheelchair users how they would like to proceed....
-
Platform Lifts
In the final rule, provisions have been added that permit platform lifts where exterior site constraints make installation of a ramp or elevator infeasible (206.7.5) and in residential dwelling...
-
11B-206.2.1 Site arrival points
.) ◼ [ADA Title II] §35.151(i) New Construction and Alterations; Curb Ramps....
-
About This Tool Kit
Chapter 6, Curb Ramps and Pedestrian Crossings (HTML) | PDF Chapter 6 explains Title II’s requirements for providing curb ramps at pedestrian crossings, lists some key characteristics...
-
11B-1009.3.1 Sloped entries
Exception: Where sloped entries are provided, the surfaces shall not be required to be slip resistant....
-
R407.9.2 Curb or Barrier
A curb or barrier shall be provided that prevents the passage of a 100 mm (4 in) diameter sphere, where any portion of the sphere is within 100 mm (4 in) of the finish surface....
-
T702.8 Contrast
Where provided, protective surfaces over signs shall have a non-glare finish....
-
1009.3.1 Sloped Entries
Sloped entries shall comply with Chapter 4 except as modified in 1109.3.1 through 1109.3.3 EXCEPTION: Where sloped entries are provided, the surfaces shall not be required to be slip...
-
M302.3.2 Armrests
Armrests on transfer sides are not permitted to obstruct access to the transfer surface. See M302.2.3 Exception....
-
11B-1009.3.1 Sloped entries
Exception: Where sloped entries are provided, the surfaces shall not be required to be slip resistant....
-
11B-705.1.2.1 Platform edges
Detectable warning surfaces at platform boarding edges shall be 24 inches (610 mm) wide and shall extend the full length of the public use areas of the platform....
-
11B-1009.3.1 Sloped entries
Exception: Where sloped entries are provided, the surfaces shall not be required to be slip resistant....
-
1009.5.7 Grab Bars
Where a grab bar is provided on each step, the tops of gripping surfaces shall be 4 inches (100 mm) minimum and 6 inches (150 mm) maximum above each step and transfer platform....
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
Height of Tables or Counters [4.32.4]
Height of Tables or Counters [4.32.4] Counter and table surface heights (28 to 34 inches) should be specified in consideration of the intended use....
-
2.2.1 Demographic Information
., power chair, scooter), and within each type: make, model, age, armrests, footrests, drive wheels, controller, seat support surfaces and overall condition of the seating surface....
-
4.6.3* PARKING SPACES
Parking spaces and access aisles shall be level with surface slopes not exceeding 1:50 in all directions....
-
Is an accessible route required to rooftop levels?
., equipped with lighting, ventilation, and means of egress) that is “included between the upper surface of a floor and upper surface of the floor or roof next above” (§106.5)....
-
M305.2.7 Clearance (Section-by-Section Analysis)
Specifically, the Access Board sought input from the public in question 22, on whether transfer supports on diagnostic equipment could provide 1½ inches minimum clearance around the gripping surface...
-
6.3 Minority Reports
6.3 Minority Reports Because the Advisory Committee did not achieve consensus on the recommendation for a minimum transfer surface height standard, U.S....