Objects with leading edges more than 27 inches (686 mm) and not more than 80 inches (2032 mm) above the finish floor or ground shall protrude 4 inches (102 mm) maximum horizontally into...
Search Results "Floor Slope"
Commonly Searched Documents
- 
    
  
  11B-307.2 Protrusion limits
  
 - 
    
  
  11B-307.2 Protrusion limits
  
Objects with leading edges more than 27 inches (686 mm) and not more than 80 inches (2032 mm) above the finish floor or ground shall protrude 4 inches (102 mm) maximum horizontally into...
 - 
    
  
  1009.6.3 Size
  
Exception: The enforcing agency may reduce the size of each required area of refuge to accommodate one wheelchair space that is not less than 30 inches by 48 inches (762 mm by 1219 mm) on floors...
 - 
    
  
  Tips for Weighing People Using an Accessible Scale
  
Sloped surface provides access to scale platform -- no abrupt level changes at floor or platform. Edge protection at drop off....
 - 
    
  
  Attachment B – Code References
  
The types of buildings and facilities are: Office buildings and passenger vehicle service stations of three stories or more and 3,000 or more square feet (279 m2 ) per floor....
 - 
    
  
  DOJ/DOT Joint Technical Assistance on the Title II of the ADA Requirements to Provide Curb Ramps when Streets, Roads, or Highways are Altered through Resurfacing
  
the public right of way, including streets, roads, and highways. 2 See 28 CFR 35.151(i)(1) (Newly constructed or altered streets, roads, and highways must contain curb ramps or other sloped...
 - 
    
  
  1. Executive Summary
  
pedestrian access routes to be provided within pedestrian circulation paths located in the public right-of-way, and would establish proposed technical provisions for the width, grade, cross slope...
 - 
    
  
  2. a. i. Accessible parking
  
Note: for more information on parking and loading specifications including diagrams, slope requirements, location, and signage, refer to ADAAG Section 4.6 Parking and Passenger Loading Zones...
 - 
    
  
  3. Terminology
  
planar surface with characteristics dimensions that affect vehicle dynamics, ride quality, dynamic loads, and drainage, for example, longitudinal profile, transverse profile, and cross slope...
 - 
    
  
  Selection of Methodology
  
stabilizer, etc.) information (product type, manufacturer name, warranty/guarantees’ information, and similar data) SECTION #3 Trail pre‐installation specifications (soil type/composition, slope...
 - 
    
  
  2.1 General
  
Where outdoor recreation access routes are provided within vehicular way (recreation site roadway), outdoor recreation access routes shall not be required to comply with 2.4 Slope, 2.5 Resting...
 - Willoughby Industries WBL-2320 Ligature-resistant Behavioral Healthcare Lavatory System
 - Access-Able Designs Child Dressing Bench CH-101
 - SDC Bollard Post with Push Plate or Touch Panel
 - Hoyer Presence Heavy-Duty Lift
 - ASI Global Partitions High Density Polyethylene Solid Plastic Toilet Partitions
 - Cybex Total Access Leg Extension Exercise Machine
 - 
    
  
  XI. Overview of Americans with Disabilities Act Accessibility Guidelines for New Construction and Alterations
  
Each floor in a building without a supervised sprinkler system must contain an "area of rescue assistance" (i.e., an area with direct access to an exit stairway where people unable to use...
 - 
    
  
  2. Analysis of footrest clearance height and depth
  
Analysis of footrest clearance height and depth Any base support or flange for the mammography machine at floor level (inside the clear floor space width) would obstruct some wheelchair...
 - 
    
  
  C. Toilet Rooms:
  
PSE shall provide and maintain directional signage at inaccessible toilet rooms indicating the location of the nearest accessible toilet room on the Floor Level. ...
 - 
    
  
  Accessible Route Into and Through the Business
  
clearance alongside the entrance door is blocked by a sale book rack, or if a route contains scattered trip hazards from impulse items displayed on cloth-covered tables or in baskets on the floor...
 - 
    
  
  Accessible Routes Throughout the Museum
  
travel between stanchions or between a wall and a stanchion, passage must be maintained at a minimum of 36 inches wide, measured from inside edge to inside edge of the stanchion bases or floor...
 - 
    
  
  307.2 Protrusion Limits
  
Objects with leading edges more than 27 inches (685 mm) and not more than 80 inches (2030 mm) above the finish floor or ground shall protrude 4 inches (100 mm) maximum horizontally into...
 - 
    
  
  11B-307.2 Protrusion limits
  
Objects with leading edges more than 27 inches (686 mm) and not more than 80 inches (2032 mm) above the finish floor or ground shall protrude 4 inches (102 mm) maximum horizontally into...