When the platform is at vehicle floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and the vehicle floor shall not exceed...
Search Results "Ground Floor Exit"
-
§ 38.159(b)(7) Platform gaps
-
11B-609.4 Position of grab bars
Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except...
-
604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured to the top of the seat....
-
604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured to the top of the seat....
-
Murdock Manufacturing Waterless Toilet Riser with Seat and Cover
Product Details Mounting: Floor Mounted Material: Stainless Steel Style: Super Secur...
-
1.14 Riser
1.14 "Riser" shall mean and refer to an elevated tier (usually six to eighteen inches) in an auditorium on which seats are affixed to the auditorium floor....
-
4. Toilet seat height
Toilet seat height: The toilet seat needs to be from 17 to 19 inches above the floor to permit transfers to and from wheelchairs....
-
Question 20
Is the required floor and wall space inside public restrooms and fitting rooms blocked by obstacles such as trash cans, chairs, or shelving?...
-
J3
Is the top of the spout no higher than 36 inches above the floor and at the front of the fountain or water cooler? [ADA Standards § 4.15.2] Yes No...
-
I. Toilet Seat
Is the toilet seat at each accessible toilet between 17"-19" above the floor? [ADA Stds. 4.16.3] Yes __ No __ N/A __ Comments: ___________________________________________...
-
e-vii
Is the elevator equipped with audible tones or bells or verbal annunciators that announce each floor as it is passed? [ADA Standards § 4.10.13] Yes No...
-
5.1.4 Turning Space
Where the camp shelter floor is not elevated above the trail or ORAR, as applicable, a turning space complying with ABAAS section 304.3 shall be provided....
-
4.19.6* MIRRORS
Mirrors shall be mounted with the bottom edge of the reflecting surface no higher than 40 in (1015 mm) from the floor (see Fig. 31)....
-
M303.2.4.1 Toe Clearance
Toe clearance shall be provided at a height of 9 inches (230 mm) above the floor to a depth of 6 inches (150 mm) maximum....
-
1134A.5, Item 2
A bathtub installed without surrounding walls shall provide reinforced areas for the installation of floor-mounted grab bars....
-
1134A.5, Item 2
A bathtub installed without surrounding walls shall provide reinforced areas for the installation of floor-mounted grab bars....
-
Additional Transfer Techniques: Use of Stretchers and Gurneys
Additional Transfer Techniques: Use of Stretchers and Gurneys Some equipment, including radiologic equipment, lacks space underneath necessary for a portable floor lift to be used....
-
What materials may satisfy ADAAG requirements?
If there is a choice between flooring materials otherwise suitable for a particular application, we recommend choosing the material with the higher coefficient of friction, particularly...
-
Neo-Metro Commercial Metaal Toilet 8956 Series
Accessibility: ADA Compliant Model(s) Available Material: Stainless Steel Mount: Floor Mounted Against Wall Environmental/Health: Contains Recycled Material , Recyclable , Water...
-
Neo-Metro Contour Commercial Stainless Steel Toilet 8955 Series
Accessibility: ADA Compliant Model(s) Available Material: Stainless Steel Mount: Floor Mounted Against Wall Environmental/Health: Contains Recycled Material ,...
-
TABLE OF CONTENTS
SECTION 1003 GENERAL MEANS OF EGRESS SECTION 1007 ACCESSIBLE MEANS OF EGRESS SECTION 1008 DOORS, GATES AND TURNSTILES SECTION 1009 STAIRWAYS SECTION 1010 RAMPS SECTION 1011 EXIT...
-
11B-202.4 Path of travel requirements in alterations, additions and structural repairs
In alteration projects involving buildings and facilities previously approved and built without elevators, areas above and below the ground floor are subject to the 20-percent disproportionality...
-
11B-202.4 Path of travel requirements in alterations, additions and structural repairs
In alteration projects involving buildings and facilities previously approved and built without elevators, areas above and below the ground floor are subject to the 20-percent disproportionality...
-
11B-409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (12.7 mm) under rated loading to zero loading conditions....
