The Department notes that self-mitigating measures or undocumented modifications or accommodations for students who have impairments that substantially limit learning, reading, writing,...
Search Results "Check Writing Surface"
-
Sections 35.108(d)(4) and 36.105(d)(4)—Examples of Mitigating Measures
-
604.7 Dispensers
paper dispensers are installed above the side wall grab bar, the outlet of the toilet paper dispenser must be 48 inches (1220 mm) maximum above the finish floor and the top of the gripping surface...
-
Platform Edges
Where this breakaway material is installed at a platform edge, the width of the detectable warning surface can begin at the edge of the breakaway material rather than at the edge of the...
-
Sloped Entries
Sloped Entries Sloped entries must comply with ADAAG accessible route provisions (36 inch minimum width, maximum 1:12 or 8.33% slope), except that the surface does not need to be slip...
-
704.4.1 Height
When in use, the touch surface of TTY keypads shall be 34 inches (865 mm) minimum above the finish floor....
-
Error/Omission: Parts of an accessible route with slopes that exceed 1:20 lack required features including handrails and edge protection.
Result: When a walkway or other pedestrian surface has a slope greater then 1:20, it is more difficult to maintain control of a wheelchair....
-
1. Scope
statistic called the Pathway Roughness Index (PRI). 1.2 This provides a standard practice for computing and reporting an estimate of pathway roughness for sidewalks and other pedestrian surfaces...
-
11B-703.7.2.5 Cleaner Air Symbol
There shall be at least a 70-percent color contrast between the background of the sign from the surface that it is mounted on. FIGURE 11B-703.7.2.5 ‡‡ CLEANER AIR SYMBOL...
-
Summary of Major Provisions
The final rule adds new technical requirements for floor surfaces, bedrooms, and weather alert systems in emergency transportable housing units with mobility features....
-
1003.3.2 Boarding Pier Clearances
At high water, the entire chain is floating and a transition plate connects the first float to the surface of the launch ramp....
-
1003.3.2 Boarding Pier Clearances
At high water, the entire chain is floating and a transition plate connects the first float to the surface of the launch ramp....
-
2.3.2 IR Receivers
In these instances, the receiving diode can be placed within an oblong lens on the top of the headband, for presumably 360 degree reception, or appear as a rounded protuberance on the surface...
-
NOTES
Note that height measurement, as defined by the tables and chairs subcommittee, represents the highest point of the transfer surface, inclusive of bolsters, when measuring to the top of...
-
Rulemaking Authority
I usually sit my computer right in front of me, so bear with me as I check that out....
- Bradley 16.5 Gallon Waste Receptacle 356
-
Baseline
Guidelines That Will Have More Than Minimal Impacts on State and Local Transportation Departments Requirement Governmental Units Affected Detectable warning surfaces...
- Wikk Industries Inc. Bollard With Push Plate PART#BPR SM AINS 32D (630)
-
Camp Shelters
Ensure that the surface of the clear floor or ground space at the open entrance side of the shelter and the floor of the shelter is firm, stable, and does not slope more than 2 percent (...
-
Table 3
identified three requirements in the proposed guidelines in Table 3 that will have more than minimal impacts on state and local transportation departments: Detectable warning surfaces...
- Bradley Oval Handwashing Basin SL-TO1
- Bradley 9.2 Gallon Waste Receptacle 3157
- Bradley Medium Capacity Towel Dispenser 2441
- American Standard Decorum 0.125 gpf Urinal System with Manual Flush Valve
- Nuance Dragon NaturallySpeaking Premium & Home Speech Recognition Software

.jpg)



