The hardware Range 260 is made of high-quality stainless steel and will be available in 2015 with a mirror-polished surface. High-gloss PVD surfaces will also be available on request....
Search Results "Road Surface Treatment"
Commonly Searched Documents
- HEWI Range 260 Door Hardware
- Rakks® EHV Vanity Supports
- American Standard Acrylic Shroud for American Standard Selectronic Faucets
-
5. Exception from the Requirements of M302 for Weight Scales with Integral Seats
question 28, which asked whether a folding seat provided on diagnostic equipment with a wheelchair space should be required to comply with the technical criteria in proposed M302 for transfer surfaces...
- AJW Architectural Products U2314 Unidoor C-fold/Multifold Towel Dispenser - Recessed
- AJW Architectural Products U2304 Unidoor C-fold/Multifold Towel Dispenser - Recessed
- Bradley Chrome-Plated Towel Hook 9311
-
3.1 Refining MDE Definition and Committee Scope
Therefore, from the outset, Committee members recognized that their deliberations would exclude considerations relevant to children and youth and medical equipment used for therapeutic or treatment...
- Bradley Angle Frame Mirror 780
-
Philips Healthcare
Signed: ____________________________________________ (Signature required) Representing: __Philips Healthcare ______ __3000 Minuteman Road Andover, MA 01810-1099...
-
Other Hospital-Based Sources of Data
Thus, existing hospital-based data sources would appear to be of limited usefulness for studying the safety characteristics of emerging road and trail users....
- Bradley Channel Frame Mirror 781
- Bradley Chrome-Plated Hook and Bumper 915
-
11B-308.3.2 Obstructed high reach
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
406 Curb Ramps
These include specifications for running slope, surface, clear width, and wet conditions. Consistent with the scope of the guidelines, these requirements apply to facilities on sites....
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
The symbol shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured from the centerline of the symbol....
-
A. The Substantive Legal Dispute
unsafe, non-compliant, or missing ramps; (2) broken pedestrian rights of way that are cracked, crumbled, steep, sunken, or uneven or that have improper slopes or broken and inaccessible surfaces...
-
224.7 Housing at a place of education
suites and clustered sleeping rooms) or on floors containing accessible sleeping rooms with mobility features shall provide turning spaces that comply with section 809.2.2 and kitchen work surfaces...
-
11B-505.10 Handrail extensions
Handrail gripping surfaces shall extend beyond and in the same direction of stair flights and ramp runs in accordance with Section 11B-505.10. Exceptions: 1. ...
-
Passing Spaces on Trails
A T-intersection of two trails or other walking surfaces also may be used as a passing space if the arms and stem of the T-shaped space extend at least 48 inches (1,220 millimeters) beyond...
-
R404 Clear Spaces (Section-by-Section Analysis)
Clear spaces must comply with the technical requirements for surfaces (see R302.7)....
-
4.1.2 Number of Wheelchair Seating Spaces
Picnic tables shall have at least one wheelchair seating space for each 24 linear feet (7 linear m) of usable table surface perimeter as shown in table 4.1.2....
-
4.1.6(3)(d)
Passenger Loading Zones, (ii) 4.15, Drinking Fountains and Water Coolers, (iii) 4.25, Storage, (iv) 4.28, Alarms, (v) 4.31, Telephones, (vi) 4.32, Seating, Tables, and Work Surfaces...
-
11B-505.10 Handrail extensions
Handrail gripping surfaces shall extend beyond and in the same direction of stair flights and ramp runs in accordance with Section 11B-505.10. Exceptions: 1. ...