Where provided, railings, guards, or handrails shall comply with 1005.2....
Search Results "Ramp Handrail"
Filters
Commonly Searched Documents
-
Railings: ADA Standard Section 1005.2
-
Is there a limit on the total length (number of runs) a ramp may have?
.), but not the overall length of ramps comprised of multiple runs. Since the usability of ramps decreases with length, considerably long ramp systems should be avoided where possible....
-
RAMP
RAMP. A walking surface that has a running slope steeper than one unit vertical in 20 units horizontal (5-percent slope)....
-
11B-1005.2 Railings
Where provided, railings, guards, or handrails shall comply with Section 11B-1005.2....
-
EZ-ACCESS Suitcase Singlefold AS Ramp
The Suitcase Singlefold AS Ramp – this portable single-fold ramp is one of our most user-friendly portable Suitcase ramps. ...
-
505.5 Clearance
Clearance between handrail gripping surfaces and adjacent surfaces shall be 1½ inches (38 mm) minimum. Figure 505.5 Handrail Clearance...
-
EZ-ACCESS Suitcase Singlefold Ramp
Single-Fold Ramp Hinge The Suitcase Singlefold Ramp’s single-fold hinge runs the full length of the ramp and ensures the ramp is strong and safe....
-
Are curved or circular ramps allowed?
Ramps without level landings at changes in direction typically will not meet the Standards due to resulting compound slopes....
-
505.5 Clearance
Clearance between handrail gripping surfaces and adjacent surfaces shall be 1½ inches (38 mm) minimum. Figure 505.5 Handrail Clearance...
-
11B-1008.2.5.2 Elevated
The rise for any ramp run connecting elevated play components shall be 12 inches (305 mm) maximum....
-
Diagonal Curb Ramps: ADA Standard Section 406.6
Section 406.6 covers the current ADA Standards for diagonal curb ramps.
-
R409.9 Fittings
Handrails shall not rotate within their fittings. Where expansion joints are necessary for large spans of handrails, the expansion joint is permitted to rotate in its fitting....
-
Eliminating Hazards [4.26.4]
Eliminating Hazards [4.26.4] Handrails, grab bars, and adjacent surfaces cannot have any sharp or abrasive elements....
-
Cross Slope: ADA Standard Section 405.3
Section 405.3 covers the current ADA Standards for cross slope requirements on ramps.
-
T206 Handrails, Stanchions, and Handholds
The 2016 Non-Rail Vehicle Guidelines, as with the existing guidelines, require handrails, stanchions, or handholds to be provided at passenger doorways, fare collection devices (where such...
-
Curb Ramps
Requirement: 4.7.5 Sides of Curb Ramps....
-
SafePath BigHorn™ Ramps
BigHorn Ramp Instructions BigHorn™ Ramps modifies existing thresholds up to 1 ½” and has molded traction pads for both slip-resistant protection and visual appeal....
-
11B-405.2 Slope
Ramp runs shall have a running slope not steeper than 1:12. Exception: Reserved....
-
a) Curb Ramps
a) Curb Ramps 48....
-
11B-406 Curb ramps, blended transitions and islands
[2010 ADA Standards] 406 Curb Ramps ETA Editor's Note The differences between 2010 ADA Standards Section 406 and CBC Section 11B-406 are numerous, as indicated by the italicized...
-
R409.5 Clearance
Clearance between handrail gripping surfaces and adjacent surfaces shall be 38 mm (1.5 in) minimum....
-
505.5 Clearance
Clearance between handrail gripping surfaces and adjacent surfaces shall be 1 1/2 inches (38 mm) minimum....
-
505.5 Clearance
Clearance between handrail gripping surfaces and adjacent surfaces shall be 1 1/2 inches (38 mm) minimum....
-
SECTION 1023 INTERIOR EXIT STAIRWAYS AND RAMPS
[See subsections ...]
