Knee clearance shall be 30 inches (762 mm) wide minimum....
Search Results "Latch Side Clearance"
-
11B-306.3.5 Width
-
11B-306.3.5 Width
Knee clearance shall be 30 inches (762 mm) wide minimum....
-
11B-306.2.5 Width
Toe clearance shall be 30 inches (762 mm) wide minimum....
-
306.2.5 Width
Toe clearance shall be 30 inches (760 mm) wide minimum....
-
306.3.5 Width
Knee clearance shall be 30 inches (760 mm) wide minimum....
-
306.2.2 Maximum Depth
Toe clearance shall extend 25 inches (635 mm) maximum under an element....
-
R405.2.4 Width
Toe clearance shall be 760 mm (2.5 ft) wide minimum....
-
R405.3.5 Width
Knee clearance shall be 760 mm (2.5 ft) wide minimum....
-
306.2.2 Maximum Depth
Toe clearance shall extend 25 inches (635 mm) maximum under an element....
-
306.2.2 Maximum Depth
Toe clearance shall extend 25 inches (635 mm) maximum under an element....
-
306.2.2 Maximum Depth
Toe clearance shall extend 25 inches (635 mm) maximum under an element....
-
404.2.11 Vision Lights
Doors, gates, and side lights adjacent to doors or gates, containing one or more glazing panels that permit viewing through the panels shall have the bottom of at least one glazed panel...
-
Can handrails overlap door maneuvering clearances?
No, door maneuvering clearances must be free of any overlapping objects, even those providing knee and toe clearance, which can interfere with maneuvering at doors and doorways....
-
Is compliance on both sides of a door or gate required when it is usable only from one side?
No, compliance is not required on both sides of those doors or gates that can be used in one direction only. Compliance is required only on the usable side....
-
R405.2.2 Maximum Depth
Toe clearance shall extend 635 mm (2.1 ft) maximum under an element....
-
306.2.2 Maximum Depth
Toe clearance shall extend 25 inches (635 mm) maximum under an element....
-
11B-404.2.7 Door and gate hardware
Handles, pulls, latches, locks, and other operable parts on doors and gates shall comply with Section 11B-309.4....
-
11B-604.5.1 Side wall
The side wall grab bar shall be 42 inches (1067 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1372 mm) minimum from the rear wall with...
-
305.7 Maneuvering Clearance
Where a clear floor or ground space is located in an alcove or otherwise confined on all or part of three sides, additional maneuvering clearance shall be provided in accordance with 305.7.1...
-
305.7 Maneuvering Clearance
Where a clear floor or ground space is located in an alcove or otherwise confined on all or part of three sides, additional maneuvering clearance shall be provided in accordance with 305.7.1...
-
305.7 Maneuvering Clearance
Where a clear floor or ground space is located in an alcove or otherwise confined on all or part of three sides, additional maneuvering clearance shall be provided in accordance with 305.7.1...
-
11B-404.2.11 Vision lights
Doors, gates, and side lights adjacent to doors or gates, containing one or more glazing panels that permit viewing through the panels shall have the bottom of at least one glazed panel...
-
11B-503.5 Vertical clearance
spaces, access aisles serving them, and a vehicular route from an entrance to the passenger loading zone and from the passenger loading zone to a vehicular exit shall provide a vertical clearance...
-
11B-503.5 Vertical clearance
spaces, access aisles serving them, and a vehicular route from an entrance to the passenger loading zone and from the passenger loading zone to a vehicular exit shall provide a vertical clearance...