Use of support rails and hinged support rails assists the movement sequences on sitting down and standing up. They provide a secure hold and therefore promote the users' independence....
Search Results "Horizontal Standing Support"
Commonly Searched Documents
- HEWI Hinged Support Rail Duo
-
Horizontal Alignment
Horizontal Alignment The minimum clearance to an obstruction that should be provided along a horizontal curve is a function of the stopping sight distance and radius of the curve....
-
Free-Standing Overhead Lifts
Free-Standing Overhead Lifts Another type of overhead lift is supported from a frame that rests on the floor....
-
Stages.
If the witness stand is raised, then either a ramp or lift must be provided to ensure access to the witness stand. ...
-
Study Objectives
The purpose of this study was to examine independent transfers to and from a WMD and a simple platform, with and without the use of grab bars and/or a backrest, and transfers between...
-
§ 35.151(g) Assembly areas
(g) Assembly areas. Assembly areas subject to the proposed standards shall comply with the provisions applicable to assembly areas, including, but not limited to, sections 221 and...
-
Section 35.151(g) Assembly Areas (Section-by-Section Analysis)
The Department is proposing a new § 35.151(g) to supplement the assembly area requirements in the proposed standards. This provision would add five additional...
-
§ 35.151(g) Assembly areas.
(g) Assembly areas. Assembly areas subject to this section shall comply with the provisions of the 2010 Standards applicable to assembly areas, including, but not limited to,...
-
M305.2.3 Height (Section-by-Section Analysis)
The MDE Advisory Committee supported adding a requirement setting the height of transfer supports within the range described in question 20 in the MDE NPRM preamble, of 6 inches minimum...
-
M305.2.1 Location (Section-by-Section Analysis)
In the preamble to the MDE NPRM, the Access Board noted it was considering requiring transfer supports to be located no further than 1½ inches from the transfer surface, when measured horizontally...
-
11B.707.7.1.3 Horizontally mounted display screen
Where display screens are mounted tipped away from the viewer 60 degrees to 90 degrees (horizontal) from vertical, the center line of the display screen and other display devices shall be...
-
Gripping Surface Cross Section and Clearances M301, M302, and M305.2
Gripping Surface Cross Section and Clearances M301, M302, and M305.2 Gripping surface for transfer supports shall be free of sharp or abrasive elements and shall have rounded edges per...
-
M301.3.2 Stirrups
Where stirrups are provided, they shall provide a method of supporting, positioning, and securing the patient’s legs....
-
Determine All Your Evacuation Options and Prioritize Them
Sprinkler systems will, in most circumstances, provide the protection to permit evacuation that is limited to the area under immediate threat from the fire (horizontal exits versus total...
- Service Animals for Business Owners
-
R302.7.3 Horizontal Openings
R302.7.3 Horizontal Openings. Horizontal openings in gratings and joints shall not permit passage of a sphere more than 13 mm (0.5 in) in diameter....
-
Standards Specific to Assembly Areas
Dispersion of Wheelchair Spaces: Box Seats: Wheelchair spaces must be provided and located in not fewer than 20% of all boxes.Wheelchair spaces must be dispersed vertically, horizontally...
-
Sec.36.308(a) Existing facilities
(a) Existing facilities.
-
Hand Cycles (Stand-Alone)
Hand Cycles (Stand-Alone) On stand-alone models of hand cycles, the pedaling motion is done with the arms (figures 11 and 12)....
-
2. Standing
Standing 9....
-
Regulatory Impact Analysis.
Side reach; water closet clearances in single-user toilet rooms with in-swinging doors; stairs; elevators; location of accessible routes to stages; accessible attorney areas and witness stands...
-
Tips for Weighing People Using an Accessible Scale
You should use an accessible scale with people who… Have difficulty standing or maintaining balance on a standard scale platform....
-
M101.2 Application (Section-by-Section Analysis)
In the NPRM the Access Board proposed that the MDE Standards would be applied to diagnostic equipment based on the patient position the equipment is designed to support....
-
11B-602.7 Drinking fountains for standing persons
Spout outlets of drinking fountains for standing persons shall be 38 inches (965 mm) minimum and 43 inches (1092 mm) maximum above the finish floor or ground....