The distance between two hinged or pivoted doors in series and gates in series shall be 48 inches (1220 mm) minimum plus the width of doors or gates swinging into the space....
Search Results "Door Operator"
Filters
Commonly Searched Documents
-
404.2.6 Doors in Series and Gates in Series
-
Door and Signal Timing for Hall Calls [4.10.7], Door Delay for Car Calls [4.10.8]
Timing, based on the distance between the farthest call button and the elevator door, begins with visible and audible signaling of car arrival....
-
§ 1194.21 Software applications and operating systems
§ 1194.21 Software applications and operating systems....
-
Toilet Room Doors
Sections 4.22.2 and 4.22.3 of the 1991 Standards and Section 603.2.3 of the 2010 Standards permit the doors of all toilet or bathing rooms with in-swinging doors to swing into the required...
-
1132A.3 Width and height of interior doors and secondary exterior doors
Doors shall comply with the following: Doors shall not be less than 6 feet 8 inches (2032 mm) in height. ...
-
Low Energy Doors and Gates [§404.3]
Low Energy Doors and Gates [§404.3] Low energy doors and gates usually require activation by the user through a push plate or control and are often used in moderate traffic locations...
-
§1193.41(d) Operable without hearing
(d) Operable without hearing. Provide at least one mode that does not require user auditory perception....
-
1132A.3 Width and height of interior doors and secondary exterior doors
1132A.3 Width and height of interior doors and secondary exterior doors. Doors shall comply with the following:...
-
Operable controls (Preamble, Section-by-Section Analysis)
Operable controls. The proposed rule defined operable controls as those components of a product that require physical contact for normal operation of the device....
-
11B-205 OPERABLE PARTS
[See subsections ...]
-
11B-309 OPERABLE PARTS
[See subsections ...]
-
4.27 Controls and Operating Mechanisms
[See subsections ...]
-
A4.27 Controls and Operating Mechanisms
[See subsections ...]
-
Controls and Operating Mechanisms [4.27]
[See subsections ...]
-
4.27 CONTROLS AND OPERATING MECHANISMS
[See subsections ...]
-
A4.27 CONTROLS AND OPERATING MECHANISMS
[See subsections ...]
-
Common Questions (Operable Parts)
Common Questions
-
11B-205 Operable parts.
[See subsections ...]
-
11B-309 Operable parts.
[See subsections ...]
-
11B-205 Operable parts
[See subsections ...]
-
11B-309 Operable parts
[See subsections ...]
-
404.2.4.3 Recessed Doors and Gates
404.2.4.3 Recessed Doors and Gates....
-
11B-404.2.6 Doors in series and gates in series
The distance between two hinged or pivoted doors in series and gates in series shall be 48 inches (1219 mm) minimum plus the width of doors or gates swinging into the space....