1009.7.2 Riser height and tread depth. ... Exceptions: 6. See Section 3404.1 for the replacement of existing stairways. [DSA-AC] For applications listed in Section 1.9.1...
Search Results "Delayed Egress Lock"
Filters
Commonly Searched Documents
-
1009.7.2 Riser height and tread depth
-
1011.4, Item 4
4. Each exit access door from an interior room or area to a corridor or hallway that is required to comply with Section 1011.1, shall be identified by a tactile exit sign with the...
-
1011.4, Item 2.2
2.2 “EXIT RAMP DOWN”
-
1011.4, Item 2.1
2.1 “EXIT STAIR DOWN”
-
1017.2 Aisles in assembly spaces
1017.2 Aisles in assembly spaces. Aisles and aisle accessways serving a room or space used for assembly purposes shall comply with Section 1028.
-
1007.8.2 Directions
1007.8.2 Directions. Directions for the use of the two-way communication system, instructions for summoning assistance via the two-way communication system and written identification...
-
1007.8.1 System requirements
1007.8.1 System requirements. Two-way communication systems shall provide communication between each required location and a central control point location approved by the fire...
-
1017.3 Aisles in Groups B and M
1017.3 Aisles in Groups B and M. In Group B and M occupancies, the minimum clear aisle width shall be determined by Section 1005.1 for the occupant load served, but shall not be...
-
1007.2, Item 10
10. Exterior area for assisted rescue complying with Section 1007.7.
-
1011.4, Item 2.3
2.3 “EXIT STAIR UP”
-
1013.3 Height
1013.3 Height. Required guards shall not be less than 42 inches (1067 mm) high, measured vertically as follows: 1. From the adjacent walking surfaces; 2. On stairs,...
-
1011.4, Item 2.4
2.4 “EXIT RAMP UP”
-
1011.4, Item 5
5. Each exit door through a horizontal exit that is required to comply with Section 1011.1 shall be identified by a sign with the words, “TO EXIT.”
-
1013.4, Item 4
4. Each exit access door from an interior room or area to a corridor or hallway that is required to comply with Section 1013.1, shall be identified by a tactile exit sign with the...
-
1009.2, Item 10
10. Exterior areas for assisted rescue complying with Section 1009.7 serving exits at the level of exit discharge.
-
1013.4, Item 2.1
2.1. “EXIT STAIR DOWN”
-
1013.4, Item 2.2
2.2. “EXIT RAMP DOWN”
-
1013.4, Item 2.4
2.4. “EXIT RAMP UP”
-
1013.4, Item 2.3
2.3. “EXIT STAIR UP”
-
1013.4, Item 5
5. Each exit door through a horizontal exit that is required to comply with Section 1013.1 shall be identified by a sign with the words, “TO EXIT.” Raised character and Braille...
-
1015.3 Height
Required guards shall not be less than 42 inches (1067 mm) high, measured vertically as follows: From the adjacent walking surfaces. On stairways and stepped aisles,...
-
1011.5.2 Riser height and tread depth
... Exceptions: 4. See California Fire Code Chapter 11 and California Existing Building Code for the replacement of existing stairways. [DSA-AC] For applications listed in...
-
1018.5 Aisles in other than assembly spaces and Groups B and M
In other than rooms or spaces used for assembly purposes and Group B and M occupancies, the minimum clear aisle capacity shall be determined by Section 1005.1 for the occupant load...
-
1018.3 Aisles in Groups B and M
1018.3 Aisles in Groups B and M. In Group B and M occupancies, the minimum clear aisle width shall be determined by Section 1005.1 for the occupant load served, but shall not be less...