Corada

4.8.5(5)

(5) Top of handrail gripping surfaces shall be mounted between 34 in and 38 in (865 mm and 965 mm) above ramp surfaces.

4.9.4(5)

(5) Top of handrail gripping surface shall be mounted between 34 in and 38 in (865 mm and 965 mm) above stair nosings.

The Brewer Company, LLC

for adjustable height transfer surfaces....

Mockett TLRAL27 Roma Series Adjustable Table Leg

Just rotate the barrel, move the leg up or down to the right height, and twist the barrel closed....

609.4 Side Wall Grab Bar Height

609.4 Rear Wall Grab Bar Height

4.1.2 Surface Design of Examination Tables and Chairs

Thus, contouring must be addressed in considering minimum height standards for accessibility of transfer surfaces (Section 5.1.4)....

Museum Gift Shop

The 42" height of the main cashier counter and the 42 1/2" height of the second cashier counter exceed the maximum 36" allowable height above the finished floor....

Bed Height Fact Sheet

Hotels need to adopt the recommended bed height range so individuals can safely transfer to and from the bed....

4.30.6 Mounting Location and Height

4.30.6 Mounting Location and Height. Where permanent identification is provided for rooms and spaces, signs shall be installed on the wall adjacent to the latch side of the door....

§ 38.113(d)(2) Exception

New cars operating in existing stations may have a floor height within plus or minus 11/2 inches of the platform height....

Parallel Grab Bars

With respect to the lower grab bar at bathtubs, the specified mounting height has been changed to a range of 8 inches minimum to 10 inches maximum above the rim of the bathtub....

Handrails

...are there handrails on both sides of the stair at a uniform height of 34"-38" above the front edge of the step?...

Q1.) When a ramp has a maximum slope of 1:12 or 8.33%, is that considered a range of from 0% to 8.33% which would allow no slope greater than 8.33% or is that a simple maximum which would allow a tolerance above 8.33%? Similarly, is a cabinet countertop that can be no higher than 34” AFF a range of from 0” to 34” AFF with no additional height allowed, or is a tolerance allowed for variations in the floor surface or cabinet construction?

A1.) The consistent technical assistance on this question has been that both are subject to tolerances.

Allegion Falcon SC70 Series Surface Mounted Door Control

Falcon SC70 Series heavy duty closers are built for busy commercial applications that demand reliable door control and easy maintenance. ...

4.30.6 MOUNTING LOCATION AND HEIGHT

Interior signage shall be located alongside the door on the latch side and shall be mounted at a height of between 54 in and 66 in (1370 mm and 1675 mm) above the finished floor....

ADAEZ Pro Plus Automatic Door Opener Programing the Operator Video

ADAEZ Pro Plus Automatic Door Opener Installing Operator Mounting Bracket and Door Arm Pivot Video

ADAEZ Pro Plus Automatic Door Opener Quick Tip Shock Absorbing Door Arm Video

ADAEZ Pro Plus Automatic Door Opener Quick Tip Offset Pivot Application Video

ADAEZ Pro Plus Automatic Door Opener Mounting Template Video

ADAEZ Pro Plus Automatic Door Opener Installing Door Arm Pivot Video

This video shows how to install the door arm pivot portion of the ADAEZ Automatic Door Opener

ADAEZ Pro Plus Automatic Door Opener Quick Tip Door Arm Pivot Variations Video