A curb or barrier shall be provided that prevents the passage of a 4 inch (100 mm) diameter sphere, where any portion of the sphere is within 4 inches (100 mm) of the finish floor or ground...
Search Results "Built-Up Curb Ramp"
Filters
Commonly Searched Documents
-
405.9.2 Curb or Barrier
-
R304.5.3 Cross Slope
The cross slope of curb ramps, blended transitions, and turning spaces shall be 2 percent maximum....
-
4.32.1 Minimum Number
Fixed or built-in seating or tables required to be accessible by 4.1 shall comply with 4.32....
-
DSA Drawing 11B-406.6-5 Raised Island next to Curbs and Gutters (2016 CBC)
Requires the Premium User plan or above. (Login or upgrade your account!) -
4.32.1 MINIMUM NUMBER
Fixed or built-in seating, tables, or work surfaces required to be accessible by 4.1 shall comply with 4.32....
-
Rise: ADA Standard Section 405.6
Section 405.6 covers the current ADA Standards for the rise requirements of ramps.
-
11B-405.6 Rise
The rise for any ramp run shall be 30 inches (762 mm) maximum....
-
11B-405.7.2 Width
The landing clear width shall be at least as wide as the widest ramp run leading to the landing....
-
405.9.2 Curb or Barrier
A curb or barrier shall be provided that prevents the passage of a 4 inch (100 mm) diameter sphere, where any portion of the sphere is within 4 inches (100 mm) of the finish floor or ground...
-
405.9.2 Curb or Barrier
A curb or barrier shall be provided that prevents the passage of a 4 inch (100 mm) diameter sphere, where any portion of the sphere is within 4 inches (100 mm) of the finish floor or ground...
-
1.9.1.1.4
1.9.1.1.4 With respect to buildings, structures, sidewalks, curbs and related facilities not requiring a building permit, building standards published in the California Building Standards...
-
I. Ensuring Compliance Now and In the Future
To survey curb ramps in your community, use the Curb Ramps survey form and instructions that will be included in the Appendices to this Tool Kit, which will be released soon. ...
-
11B-505.2 Where required
Handrails shall be provided on both sides of stairs and ramps....
-
SECTION 1012 RAMPS
[DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required for...
-
Can curbs be used to indicate areas with less than 80” of vertical clearance?
Curbs may be mistaken for a step or change in level, instead of a barrier....
-
Location: ADA Standard Section 407.2.1.4
Section 407.2.1.4 covers the current ADA Standards for the location of elevator call controls.
-
Balco FMS-A and FMS-V Roll-Up Floor Mat
Balco's Premium Roll-Up Mat is a Vinyl Hinge Construction with Standard Mill Finish Aluminum; Clear Anodized, and Medium Bronze Anodized Finishes Available....
-
11B-303.5 Warning curbs
changes in level exceeding 4 inches (102 mm) in a vertical dimension between walks, sidewalks or other pedestrian ways and adjacent surfaces or features shall be identified by warning curbs...
-
11B-407.2.1.4 Location
The call button that designates the up direction shall be located above the call button that designates the down direction. Exception: Reserved....
-
SafePath EZCurb™ Wheelchair Ramps - Vertical Barrier Removal
EZCurbTM Ramps are designed to provide ramped access and vertical barrier removal where there is a single path-of-travel requirement....
-
9. Exterior Ramps
9. ...do the exterior ramps have the following features: a. top and bottom landings that are level, at least as wide as the ramp they serve, and at least 60" long to allow for adequate...
-
D. What Does Title II of the ADA Require with Respect to Curb Ramps at Pedestrian Crossings?
Title II of the ADA requires state and local governments to make pedestrian crossings accessible to people with disabilities by providing curb ramps.2 This requirement applies if your state...
