In such cases, the riser shall have vertical or nearly vertical sides and a flat area on each side of the seat that is about 3 inches (75 millimeters) wide. ...
Search Results "Raised Judging Area"
Filters
Commonly Searched Documents
-
5.3.4 Grab Bars
-
604 Water Closets and Toilet Compartments
toilet buildings with multiple risers provided at recreation sites with a FS Recreation Site Development Scale of 3 or higher, and for the Exception under Pit Toilets in General Forest Areas...
-
4.1.6(4)(c)
(ii) Where existing shaft or structural elements prohibit strict compliance with 4.10.9, then the minimum floor area dimensions may be reduced by the minimum amount necessary, but in no...
-
§100.70(d)(2)
(2) Employing codes or other devices to segregate or reject applicants, purchasers or renters, refusing to take or to show listings of dwellings in certain areas because of race, color,...
-
Format and Organization
The proposed rule would have established the scoping and technical requirements for camping facilities, picnic facilities, viewing areas, trails, and beach access routes as separate guidelines...
-
Surface Smoothness
Recommendation: Avoid materials or construction methods that create bumpy and uneven surfaces in areas and along routes required to be accessible....
-
11B-407.2.2.1 Visible and audible signals
Where in-car signals are provided, they shall be visible from the floor area adjacent to the hall call buttons. Exceptions: 1. Reserved. 2. Reserved. [2010 ADAS] 2....
-
§ 37.153(c)(3)
entity to provide basic complementary paratransit service, the Administrator shall require the public entity to coordinate with other available providers of demand responsive service in the area...
-
GRADE (Adjacent Ground Elevation)
[DSA-AC & HCD 1-AC] The lowest point of elevation of the finished surface of the ground, paving or sidewalk within the area between the building and the property line or, when the property...
-
§ 38.125(c)(1) Design load
Ramps or bridge plates 30 inches or longer shall support a load of 600 pounds, placed at the centroid of the ramp or bridge plate distributed over an area of 26 inches by 26 inches, with...
-
§ 38.95(c)(1) Design load
Ramps or bridge plates 30 inches or longer shall support a load of 600 pounds, placed at the centroid of the ramp or bridge plate distributed over an area of 26 inches by 26 inches, with...
-
§ 37.3 Vanpool
including the driver) or buses, which provides transportation to a group of individuals traveling directly from their homes to their regular places of work within the same geographical area...
-
GRADE (Adjacent Ground Elevation)
[DSA-AC & HCD 1-AC] The lowest point of elevation of the finished surface of the ground, paving or sidewalk within the area between the building and the property line or, when the property...
-
382.151 What are the requirements for providing Complaints Resolution Officials?
If a passenger raises a disability-related concern, and the carrier’s personnel do not immediately resolve the issue to the customer’s satisfaction, the carrier must say, in effect, “We...
-
M305.3.1 Length (Section-by-Section Analysis)
The MDE Advisory Committee supported the proposed technical provisions, but recommended adding additional criteria for standing supports on raised platforms with wheelchair spaces....
-
8.5 Updating Standards in the Future
Wheelchair technologies might also change, lowering or raising seat heights or altering width or depth dimensions....
-
"Service Animal" (Section-by-Section Analysis)
Issues raised by the commenters include:...
-
Comments on the Three Options
In addition to specific issues and questions raised about the design standards recommended by the proposed guidelines, a number of commenters simply submitted comments on their overall opinion...
-
Map-kiosk hybrid
Accessibility features, including optional raised lines or large print, could be added to the maps on request)....
-
Section 37.41 Construction of Transportation Facilities by Public Entities
Questions have been raised concerning which standards apply before January 26, 1992....
-
11B-809.2.2 Turning space
space that is at least 36 inches (915 mm) wide, as opposed to the required 30 inches (760 mm) wide, that clearance can be part of a T-turn, thereby maximizing efficient use of the kitchen area...
-
11B-213.3.6 Bathing facilities
Where two or more accessible showers are provided within the same functional area, at least one shower shall be opposite hand from the other or others (that is, one left-hand controls versus...
-
11B-802.1.3 Depth
A rear or front entry wheelchair space, as depicted in Figure 11B-802.1.3 (a) can have a shorter length (48 inches) of maneuvering area....
-
11B-408.4.1 Car dimensions and doors
Existing elevator cars shall be permitted to provide a clear width 36 inches (915 mm) minimum, clear depth 54 inches (1370 mm) minimum, and a net clear platform area 15 square feet minimum...