[ADA Standards § 4.13.11 (2)(b)] Yes No Note: Fire doors are still considered to be accessible if they have the minimum opening force allowable by the appropriate administrative...
Search Results "Regarded as Having an Impairment"
-
g-iv
-
A3
Yes No Note: Unlike at an accessible parking space, the surface for the access aisle of an accessible passenger drop-off area does not have to be marked or striped....
-
§104.44(b) Other rules
recipient to which this subpart applies may not impose upon handicapped students other rules, such as the prohibition of tape recorders in classrooms or of dog guides in campus buildings, that have...
-
C. Parking Slope
Do the parking spaces and access aisles have surface slopes less than 1:50 (i.e.: when measured as shown on the Tools & Techniques page , is the critical dimension 1/2" or less)?...
-
§ 35.171(a)(2)(i)
(i) If an agency other than the Department of Justice determines that it does not have section 504 jurisdiction and is not the designated agency, it shall promptly refer the complaint to...
-
703.2 Raised Characters
Signs that are designed to be read by touch should not have sharp or abrasive edges....
-
12162(a)(3)(A) General rule
rule It shall be considered discrimination for purposes of section 12132 of this title and section 794 of title 29 for a person who provides intercity rail transportation to fail to have...
-
106.2 Terms Defined in Referenced Standards
regulations issued by the Department of Justice and the Department of Transportation to implement the Americans with Disabilities Act, but specifically defined in a referenced standard, shall have...
-
11B-608.1 General
Shower stalls that are 60 inches (1525 mm) wide and have no curb may increase the usability of a bathroom because the shower area provides additional maneuvering space....
-
§ 36.406(f)(2)
(2) In assembly areas that are required to horizontally disperse wheelchair spaces and companion seats by section 221.2.3.1 of the 2010 Standards and that have seating encircling, in whole...
-
11B-1008.2.5.3.1 Handrail gripping surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
-
503.4.1 Caption Controls (Section-by-Section Analysis)
Caption Controls (Section-by-Section Analysis) This proposed section would require that, where video-capable software provides on-screen volume adjustment controls, such ICT must also have...
-
4.3.4 Tent Pad or Platform Surface
Tent pads and platforms shall have a surface that is firm and stable and is designed to allow use of tent stakes and other tent securing devices. Exception. ...
-
6.3(1)
(1) Each bedroom shall have a door that complies with 4.13....
-
4.28.3* Visual Alarms
Visual alarm signals shall have the following minimum photometric and location features:...
-
4.3.4 Tent Pad or Platform Surface
Tent pads and platforms shall have a surface that is firm and stable and is designed to allow use of tent stakes and other tent securing devices. Exception....
-
6.3(4)
(4) Each four-bed room shall have a minimum clear floor space of 48 in (1220 mm) from the foot of the bed to the foot of the opposing bed; 36 in (915 mm) between the side of the bed and...
-
68.101(c)(5) Existing buildings
(5) Existing buildings and facilities are ones that have not been constructed, renovated, or modified since April 1, 1994....
-
11B-703.6.3 Text descriptors
Pictograms shall have text descriptors located directly below the pictogram field....
-
11B-608.1 General
Shower stalls that are 60 inches (1525 mm) wide and have no curb may increase the usability of a bathroom because the shower area provides additional maneuvering space. ◼...
-
11B-1008.2.5.3.1 Handrail gripping surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
-
382.63 What are the requirements for accessible lavatories?
As under the present rule, only aircraft with more than one aisle must have an accessible lavatory....
-
Automatic Door Break Out Openings
The 2010 Standards at sections 404.1, 404.3, 404.3.1, and 404.3.6 require automatic doors that are part of a means of egress and that do not have standby power to have a 32-inch minimum...
-
Threshold Height
A maximum height of ½ inch is generally specified, although an exception permits a maximum height of ¾ inch at existing or altered thresholds that have a beveled edge on each side....