1.14 "Riser" shall mean and refer to an elevated tier (usually six to eighteen inches) in an auditorium on which seats are affixed to the auditorium floor....
Search Results "Vehicle Floor Coordination"
-
1.14 Riser
-
4. Toilet seat height
Toilet seat height: The toilet seat needs to be from 17 to 19 inches above the floor to permit transfers to and from wheelchairs....
-
Question 20
Is the required floor and wall space inside public restrooms and fitting rooms blocked by obstacles such as trash cans, chairs, or shelving?...
-
J3
Is the top of the spout no higher than 36 inches above the floor and at the front of the fountain or water cooler? [ADA Standards § 4.15.2] Yes No...
-
I. Toilet Seat
Is the toilet seat at each accessible toilet between 17"-19" above the floor? [ADA Stds. 4.16.3] Yes __ No __ N/A __ Comments: ___________________________________________...
-
e-vii
Is the elevator equipped with audible tones or bells or verbal annunciators that announce each floor as it is passed? [ADA Standards § 4.10.13] Yes No...
-
4.15.2* Spout Height
Spouts shall be no higher than 36 in (915 mm), measured from the floor or ground surfaces to the spout outlet (see Fig. 27(a))....
-
5.1.4 Turning Space
Where the camp shelter floor is not elevated above the trail or ORAR, as applicable, a turning space complying with ABAAS section 304.3 shall be provided....
-
4.19.6* MIRRORS
Mirrors shall be mounted with the bottom edge of the reflecting surface no higher than 40 in (1015 mm) from the floor (see Fig. 31)....
-
M303.2.4.1 Toe Clearance
Toe clearance shall be provided at a height of 9 inches (230 mm) above the floor to a depth of 6 inches (150 mm) maximum....
-
1134A.5, Item 2
A bathtub installed without surrounding walls shall provide reinforced areas for the installation of floor-mounted grab bars....
-
1134A.5, Item 2
A bathtub installed without surrounding walls shall provide reinforced areas for the installation of floor-mounted grab bars....
-
Additional Transfer Techniques: Use of Stretchers and Gurneys
Additional Transfer Techniques: Use of Stretchers and Gurneys Some equipment, including radiologic equipment, lacks space underneath necessary for a portable floor lift to be used....
-
What materials may satisfy ADAAG requirements?
If there is a choice between flooring materials otherwise suitable for a particular application, we recommend choosing the material with the higher coefficient of friction, particularly...
-
How is a charge of discrimination filed?
(See also Coordination Procedures to Avoid Duplicate Complaint Processing under the ADA and the Rehabilitation Act, below.)...
-
National Technology Transfer and Advancement Act of 1995
It coordinated extensively with model code groups and standard-setting bodies throughout the process so that differences could be reconciled. ...
-
National Technology Transfer and Advancement Act of 1995
It coordinated extensively with model code groups and standard-setting bodies throughout the process so that differences could be reconciled. ...
-
National Technology Transfer and Advancement Act of 1995
It coordinated extensively with model code groups and standard-setting bodies throughout the process so that differences could be reconciled....
-
Practice Plans Through Regular Drills
Plans should ensure that shift workers and others who work on the premises or are at the site outside typical hours, (cleaning crews, evening meeting coordinators, etc.) are included in...
-
National Technology Transfer and Advancement Act of 1995
It coordinated extensively with model code groups and standard-setting bodies throughout the process so that differences could be reconciled....
-
Camp Shelters
The long side of the clear floor or ground space must be parallel to the camp shelter entrance....
-
A. POLICIES AND PROCEDURES
Lewisboro will refresh the posted copies of the Notice and update the ADA Coordinator information contained in the Notice, as necessary, for the life of this Agreement. ...
-
11B-409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (12.7 mm) under rated loading to zero loading conditions....
-
407.4.6.2 Buttons
Car control buttons with floor designations shall comply with 407.4.6.2 and shall be raised or flush. EXCEPTION: In existing elevators, buttons shall be permitted to be recessed....