Raised thresholds and floor level changes at accessible doorways shall be beveled with a slope no greater than 1:2 (see 4.5.2)....
Search Results "Character Spacing (Raised)"
-
4.13.8* Thresholds at Doorways
-
R305.2.3 Blended Transitions
Where raised pedestrian street crossings, depressed corners, or other level pedestrian street crossings are provided, detectable warning surfaces shall be placed at the flush transition...
-
4.13.8* THRESHOLDS AT DOORWAYS
Raised thresholds and floor level changes at accessible doorways shall be beveled with a slope no greater than 1:2 (see 4.5.2)....
-
§ 38.161 Moveable aisle armrests
A minimum of 50% of aisle seats, including all moveable or removable seats at wheelchair or mobility aide securement locations, shall have an armrest on the aisle side which can be raised...
-
Dispersion: ADA Standard Section 225.3.1
Section 225.3.1 covers scoping requirements in the current ADA Standards for the dispersion of self service storage spaces.
-
11B-502.3.4 Location
spaces...
-
11B-502.3.4 Location
spaces...
-
11B-225.3.1 Dispersion
Individual self-service storage spaces shall be dispersed throughout the various classes of spaces provided....
-
11B-225.3.1 Dispersion
Individual self-service storage spaces shall be dispersed throughout the various classes of spaces provided....
-
11B-106.5 Defined terms
. ◼ ACCESS AISLE ACCESSIBILITY ACCESSIBLE ACCESSIBLE ELEMENT ACCESSIBLE MEANS OF EGRESS ACCESSIBLE ROUTE ACCESSIBLE SPACE ADAPTABLE ADDITION ADJUSTED CONSTRUCTION...
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
1009.2.4 Seat Height
height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the raised...
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-208.2.3 Residential facilities
Where at least one parking space is provided for each dwelling unit, at least one accessible space is required for each mobility accessible unit provided (11B-208.2.3.1) and those spaces...
-
11B-705.2 Detectable directional texture
Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm) , with bars raised...
-
I. Final
In the event that no objections to this Settlement Agreement are raised prior to or at the Fairness Hearing, that any objections that have been raised have been fully and formally withdrawn...
-
4.20.4 Grab Bars
Nonetheless, in both conditions, grab bars are located to help individuals get into the tub and then to lower and raise themselves to and from a seated position....
-
11B-705.2 Detectable directional texture
Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm) , with bars raised...
-
Takeform Fusion Signage Floor Directional Type B
Directional headers have raised copy. A slide-in printed insert enables the sign to be easily updated....
-
703.6.2 Finish and Contrast
Signs are more legible for persons with low vision when characters contrast as much as possible with their background....
-
703.6.2 Finish and Contrast
Signs are more legible for persons with low vision when characters contrast as much as possible with their background....
-
703.6.2 Finish and Contrast
Signs are more legible for persons with low vision when characters contrast as much as possible with their background....
-
Signage
Directional signage must meet requirements for character proportion [4.30.2] and height [4.30.3], sign finish and contrast [4.30.5] and should include the access symbol [4.30.7]....
