[2010 ADA Standards] 1....
Search Results "1991 Standards"
2010 ADA Definition
1991 Standards: From 2010 Title II Regulations section 35.104 & 2010 Title III Regulations section 36.104: Requirements set forth in the ADA Standards for Accessible Design, originally published on July 26, 1991, and republished as Appendix D to this part.
Filters
Commonly Searched Documents
-
11B-206.2.3 Multi-story buildings and facilities
-
11B-216.6 Entrances
[2010 ADA Standards] 216.6 Entrances....
-
11B-805.7 Built-in cabinets and work surfaces
These units must also comply with US Access Board Section 508 Standards for Electronic and Information Technology....
-
Americans with Disabilities Act Amendments Act of 2008
Arline, 480 U.S. 273 (1987) which set forth a broad view of the third prong of the definition of handicap under the Rehabilitation Act of 1973; (4) to reject the standards enunciated...
-
Notes
Sections 4.1.2 and 5.1.4 describe the new standardized measurement method proposed by the Advisory Committee....
-
Introduction
The objective of Task 2 is to assimilate the information gathered in Task l, to identify further anthropometric research needed to update guidelines and standards for accessible design,...
-
Appropriate Situational Applications of Technology
Uses non-proprietary, industry standard content formats (e.g., .mp3, .txt, .wav, .mov, etc.)...
-
1. Executive Summary
As discussed in the preamble to the proposed accessibility guidelines for pedestrian facilities in the public right-of- way, other federal agencies are required to adopt accessibility standards...
-
3.3 Guidance on the Visual Properties of Detectable Warnings
If a standardized color scheme is desired for detectable warnings, adopt a two-color large pattern which provides high internal contrast to ensure high conspicuity across all sidewalk types...
-
11B-604.8.1.2 Doors
[2010 ADA Standards] 604.8.1.2 Doors....
-
Title II Program Accessibility
When structural changes are made to existing pools, including installation of a fixed pool lift, the changes must comply with the 2010 Standards....
-
Requirements for Renovation or New Construction
and commercial facilities for which the last building permit is certified after January 26, 1992, and which are occupied after January 26, 1993, must be accessible in accordance with the standards...
-
2. Electronic (Digital) Level
The ADA Standards set requirements for maximum running and cross slopes, so surveyors can generally check compliance with the Standards by measuring where the running slopes appear steepest...
-
Water Closet Clear Floor Space in Toilet Compartments
The 48 inch specification measured from the leading edge of the water closet is derived from the ANSI A117.1-1992 standard....
-
‘‘Facility.’’ (Preamble, Section-by-Section Analysis)
However, standards for new construction and alterations of such facilities are not yet included in the Americans with Disabilities Act Accessibility Guidelines for Buildings and Facilities...
-
4. The Agreements’ Dispute Resolution Mechanism is Burdensome and Unlikely to Afford Complete Relief to Class Members
Second, the dispute resolution provisions set forth "Standards" that the Parties must follow in any dispute resolution procedure. Section V.B(1)....
-
§35.161 Telecommunication Devices for the Deaf (TDD's)
The relay services required by title IV would involve a relay operator using both a standard telephone and a TDD to type the voice messages to the TDD user and read the TDD messages to the...
-
4.5 Weight Scales
All standard size manual wheelchairs, powered wheelchairs, small to mid-range scooters, and most extra wide manual chairs can be accommodated through the Committee’s recommendations (see...
-
III. Proposed alternative mechanisms to enhance patient access to diagnostic imaging equipment
the case of DXA systems, it may be most effective to specify a specific range of fixed heights that the table could be at to facilitate independent transfer, similar to the fixed height standards...
-
Conclusion
and were successful with both two-step transfers, the 50th percentile could attain a 7 inch vertical height difference which is close to the maximum allowable height difference in the standards...
-
Section 35.138 Ticketing (Section-by-Section Analysis)
One disability advocacy group asserted that in order to guarantee equal access to assembly areas for people with disabilities, it is necessary to provide complementary design standards,...
-
11B-206.2.1 Site arrival points
streets, roads, or highways ETA Editor's Note Requirements for curb ramps, sidewalks and other elements in the public right of way may be covered by other Federal, State or local standards...
-
C204.1 General (Section-by-Section Analysis)
While the requirements applicable to Section 255-covered hardware are generally the same as those applied in the 508 Standards, proposed C204.1 provides one exception, which in turn, excepts...