Wheelchair securement systems shall comply with the design loads specified in T603.3.1 or T603.3.2, as applicable.
Search Results "Limited Access Space"
-
T603.3 Design Load
-
12162(b)(2) New commuter rail cars
(2) New commuter rail cars
-
3.3.3 Clear Floor Width
3.3.3 Clear Floor Width The findings on clear floor width are based on the findings on occupied width from anthropometric studies shown in Figure 3‒3. Neither the DfT or DETR...
-
3.3.4 Clear Floor Length
3.3.4 Clear Floor Length The mean value of clear floor length for our study (1250 mm or 49 in.) is above the clear floor length provided in the U.S. standards (1220 mm or 48...
-
Maneuvering for Turns
Maneuvering for 180 degree turns varies by person and the mobility aid used. An efficient way of turning using a manual wheelchair is to turn the wheels in opposite directions for a...
-
68.101. State Leases
68.101. State Leases. (Effective April 1, 1994, 19 TexReg 167; amended effective June 26, 2000, 25 TexReg 6122; repealed effective November 5, 2001, 26 TexReg 8807, new rule section...
-
68.101(c) TAS Requirements
(c) Buildings or facilities that are leased or occupied in whole or in part for use by the state, shall meet the following requirements of TAS:
-
68.101(a) State Leased Buildings > $12,000
(a) State leased buildings or facilities with an annual lease expense in excess of $12,000 shall be registered with the department by completing a State Lease Registration form and...
-
11B-608.2.2.1 Clearance
11B-608.2.2.1 Clearance. A 36 inch (914 mm) wide minimum by 60 inch (1524 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment. [2010...
-
§ 38.77 Interior circulation, handrails and stanchions
[See subsections ...]
-
§ 38.57 Interior circulation, handrails and stanchions
[See subsections ...]
-
11B-608.2.2.1 Clearance
A 36 inch (914 mm) wide minimum by 60 inch (1524 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment. [2010 ADA Standards] 608.2.2.1...
-
206.3 Location--Modification to 206.3 of Appendix B to 36 CFR Part 1191
206.3 Location--Modification to 206.3 of Appendix B to 36 CFR Part 1191 Accessible routes shall coincide with, or be located in the same area as general circulation paths....
-
11B-502.5 Vertical clearance
Parking spaces for vans and access aisles and vehicular routes serving them shall provide a vertical clearance of 98 inches (2490 mm) minimum. ...
-
Safety Step TD Parking Stall Mats
Space-aged technology makes the mat weather, UV, water and temperature-resistant. INSTALLS IN MINUTES. Save time and money when it comes to installation....
-
11B-502.5 Vertical clearance
Parking spaces, access aisles and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum. [2010 ADAS] 502.5 Vertical Clearance. ...
-
11B-502.5 Vertical clearance
Parking spaces, access aisles and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum. [2010 ADAS] 502.5 Vertical Clearance. ...
-
Accessible Route to Dumpster and Enclosure
(underline added) Because the dumpster is only used by employees when doing their work, there are some exceptions that limit the responsibility of providing accessible elements inside...
-
1007.5.1 Openness
Platform lifts on an accessible means of egress shall not be installed in a fully enclosed hoistway....
-
Sec.36.308(a)(1)(ii)
(ii) Locate the wheelchair seating spaces so that they --...
-
12162(a)(2)(D)(ii)
(ii) have space to park and secure a wheelchair;...
-
206.2.7 Press Boxes
Press boxes in assembly areas shall be on an accessible route. Notwithstanding the requirements and exceptions of this section, section 201.1.1 shall apply. EXCEPTIONS: 1....
-
Resting Intervals on Trails
If the resting interval is adjacent to the trail tread, provide a turning space complying with ABAAS section 304.3.2....
-
The Basis for the 2010 ADA Standards Pocket Guide
Learn the basis of the 2010 ADA Standards Pocket Guide
