TM 2017-25 Door and Gate Surfaces Effective Date: April 1, 2017 2012 TAS Reference: 404.2.10 404.2.10 requires door and gate surfaces within 10 inches (255mm) of the finish...
Search Results "Grade 1 Braille"
-
Technical Memorandum TM 2017-25 Door and Gate Surfaces
-
Sections 35.108(a)(2) and 36.105(a)(2) Definition of ‘‘disability’’—Rules of Construction
(i), the ‘‘record of’’ prong in paragraph (a)(1)(ii) or the ‘‘regarded as’’ prong in paragraph (a)(1)(iii)....
-
GUARD OR GUARDRAIL
GUARD [DSA-AC , HCD 1 & HCD 2] OR GUARDRAIL. ...
-
804.6.2 Operable Parts
EXCEPTIONS: 1. Appliance doors and door latching devices shall not be required to comply with 309.4. 2....
-
1008.2.6.1 Accessibility
Ground surfaces shall comply with ASTM F 1951 (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
§382.151(c)(2)
(2) Your reservation agents, contractors, and Web sites must provide information equivalent to that required by paragraph (c)(1) of this section to passengers with a disability using those...
-
408.1 General
Limited-use/limited-application elevators shall comply with 408 and with ASME A17.1 (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
ACCESSIBILITY
[DSA-AC & HCD 1-AC] Accessibility is the combination of various elements in a building, facility, site, or area, or portion thereof which allows access, circulation and the full use...
-
804.6.2 Operable Parts
EXCEPTIONS: 1. Appliance doors and door latching devices shall not be required to comply with 309.4. 2....
-
T405.3 Visual Contrast
The stripe shall be 1 inch (25 mm) wide minimum and shall contrast visually with the rest of the step tread or circulation path surface either light-on-dark or dark-on-light....
-
1i
Are all of the small showers free of curbs or lips greater than 1/2" high at the shower floor that would impede wheelchair approach and transfer onto the folding shower seat?...
-
4(4)
Thresholds and changes in level at these locations are beveled with a slope no greater than 1:2....
-
11B-608.9 Shower floor or ground surface
Floor or ground surfaces of showers shall comply with Section 11B-302.1 and shall be sloped 1:48 maximum in any direction....
-
810.2.4 Slope
Perpendicular to the roadway, the slope of the bus stop boarding and alighting area shall not be steeper than 1:48....
-
303.1 General
EXCEPTIONS: 1. Animal containment areas shall not be required to comply with 303. 2. Areas of sport activity shall not be required to comply with 303....
-
R405.3.4 Clearance Reduction
Between 230 mm (9 in) and 685 mm (2.25 ft) above the finish surface, the knee clearance shall be permitted to reduce at a rate of 25 mm (1 in) in depth for each 150 mm (6 in) in height....
-
4.21.7 Curbs
If provided, curbs in shower stalls 36 in by 36 in (915 mm by 915 mm) shall be no higher than 1/2 in (13 mm)....
-
United States of America v. Humboldt County, California - Settlement Agreement
CONSENT DECREE CIVIL ACTION NO. 1:16-cv-05139-NJV...
-
6.10 Openings
Openings in the surface of beach access routes and their related resting intervals may be up to 1/2 inch (13 millimeters) wide....
-
6.12 Handrails and Edge Protection
Where elevated dune crossings or dune crossings steeper than 1:20 (5 percent) are part of beach access routes, handrails complying with ABAAS section 505 and edge protection complying...
-
6.3 Minimum Number
At least one beach access route shall be provided for each 1/2 mile of shoreline where required by 6.2....
-
§ 37.213(a)
(a) This paragraph (a) applies to demand-responsive operators under §37.189 and fixed-route operators under §37.193(a)(1) that are required to, and small mixed-service operators under §37.191...
-
11B-812.3 Floor or ground surfaces
Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted....