The base metal is indicated in the Specs folder. All available finishes for this item are listed at right....
Search Results "Floor Destination Indicator"
Commonly Searched Documents
- Rockwood Manufacturing Company 70A Push Plate - .050" Thick 3" x 12" Plate
- Rockwood Manufacturing Company 700 Handrail Bracket
- Rockwood Manufacturing Company 215L Tapered Door Pull 28"
- Rockwood Manufacturing Company 215 Tapered Door Pull 16"
- Rockwood Manufacturing Company 71A Push Plate - .062" Thick 3" X 12" Plate
- Corbin Russwin Inc. TL3700 Series of tubular locks
-
11B-208.2.1 Hospital outpatient facilities
percentages required for hospital outpatient facilities or rehabilitation facilities specializing in treating conditions that affect mobility and outpatient physical therapy facilities (indicated...
- Florestone 35-62H Barrier-Free Shower
- Federal Elevator Carelift Wheelchair Lift
- Waterless Co. Urinal Borrego 2103
- Collapsible Water Retainer Shower Dam for Shower Threshold
-
Toilet Buildings and Pit Toilets
Provide a clear floor space that is at least 60 inches (1,525 millimeters) wide and 56 inches (1,420 millimeters) deep around the toilet....
-
1132A.8 Hand-activated door hardware
Hand-activated door latching, locking and opening hardware shall be centered between 30 inches (762 mm) and 44 inches (1118 mm) above the floor....
-
Handrail Extensions
If handrail extensions are provided, they do not need to be parallel with the ground or floor surface, since the surface may be moving due to water conditions....
-
308.2.2 Obstructed High Reach
Where a high forward reach is over an obstruction, the clear floor space shall extend beneath the element for a distance not less than the required reach depth over the obstruction....
-
610.2 Bathtub Seats
The top of bathtub seats shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor....
-
Openings, Width and Length of Wheelchair Space
Wheelchair spaces must have a clear width of 30 inches minimum and a clear length of 48 inches minimum, measured to at least 9 inches above the floor surface....
-
Adaptability
Rooms need to be designed to provide required clear floor space at fixtures, turning space, and door clearance....
-
Cross Slope and Surfaces [4.8.6]
Ramp surfaces must comply with requirements for ground and floor surfaces and be "stable, firm, and slip-resistant." A specific level of slip-resistance is not mandated....
-
Outdoor Conditions [4.8.8]
Wetness reduces slip-resistance, which is fully characterized not only by the ramp or floor surface but by the material making contact with it....
-
Stacks [8.5]
Stacks [8.5] Elements fixed to stacks, such as ladders, cannot reduce the minimum passage width nor should signs or other elements between 27 to 80 inches above the floor project more...
-
4.1.2(8)
(8) At least one principal entrance at each grade floor level to a building or facility shall comply with 4.14, Entrances....
-
1014.1 General
The technical requirements address the entrance to camp shelters (1014.2), including transfer access (1014.2.1) and roll-in access (1014.2.2); and the floor within camp shelters (1014.3)...