) with their leading edges between 27 in and 80 in (685 mm and 2030 mm) above the finished floor shall protrude no more than 4 in (100 mm) into walks, halls, corridors, passageways, or aisles...
Search Results "Designated Aisle Seat (Assembly)"
Filters
Commonly Searched Documents
-
4.4.1* General
-
2. What does the ADA require for accessibility of pools?
Title III requires newly constructed and altered business facilities to be fully accessible to people with disabilities, applying the ADA Standards for Accessible Design....
-
Interior Routes
Accessible route to all functional areas of restaurants and dining facilities. 11B-206.2.5 Accessible route to performance area from an assembly...
-
Interior Routes
Accessible route to all functional areas of restaurants and dining facilities. 11B-206.2.5 Accessible route to performance area from an assembly...
-
Purpose of the project
construction industry stakeholders to fill in the gaps in existing tolerances and procedures and to set specific tolerances and procedures for measurement for particular materials and assemblies...
-
ยง 36.303(g) Sports stadiums
One year after the effective date of this regulation, sports stadiums that have a seating capacity of 25,000 or more shall provide captioning on the scoreboards and video monitors for safety...
-
ยง 35.160(e) Sports stadiums
One year after the effective date of this regulation, sports stadiums that have a seating capacity of 25,000 or more shall provide captioning on the scoreboards and video monitors for safety...
-
11B-608.10 Soap dish
Where a soap dish is provided, it shall be located on the control wall at 40 inches (1016 mm) maximum above the shower floor, and within the reach limits from the seat....
-
ยง 37.165(f)
If it is necessary for the personnel to leave their seats to provide this assistance, they shall do so....
-
Load and Unload Areas: ADA Standard Section 234.4.1
Section 234.4.1 covers scoping requirements in the current ADA Standards for load and unload areas in existing amusement rides.
-
BOTTLE FILLING STATION
A fixture that is designed and intended for filling personal use drinking water bottles or containers. Such fixtures can be separate from or integral to a drinking fountain....
-
American Standard Serin 1 - Handle Monoblock Bidet Faucet
This bidet faucet from our modern Serinยฎ Collection is designed to be more stunning and engineered to be more user-friendly. It's easy to install....
-
Harmar EPL Enclosed Vertical Platform Lift
Either way, the ready-to-install design saves installation time and does not require modifications to structures or landscaping....
-
Inpro Corporation JointMasterยฎ 101 Series Floor Expansion Joint Covers
Seamlessly integrates with the following wall and ceiling systems: 101,104,112,113,118 A07/A09 Easy to clean flush seals No dirt or water traps Snap-fit design...
-
F. Availability of Materials Incorporated by Reference
ISO 10865-1:2012(E), Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers โ Part 1: Systems for...
-
Behavioral Safety Products #TH870 Suicide Resistant Towel Hook - Front Mount
The stainless steel ball and spring (break-away rating of 8 lbs.) inside the assembly keeps towels or clothing hung within the assembly, creating a concealed enclosure....
-
ยง382.67(b)
(b) If you are a carrier that uses the seat-strapping method to stow a manual passenger wheelchair, you must ensure that there is priority space for at least two such wheelchairs, if stowing...
-
F.
Some complainants who use wheelchairs informed the United States that the wheelchair spaces available to them in some of Cinemark's auditoria with 300 seats or less were too close to the...
-
903.6 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
(2)
(2) Accessible restrooms should be in close proximity to at least one seating location for persons using mobility aids and should be connected to such a space by an unobstructed path having...
-
Buttons: ADA Standard Section 407.4.6.2
Section 407.4.6.2 covers the current ADA Standards for the elevator car control buttons.
-
Weather Shelters: ADA Standard Section 238.2.3
Section 238.2.3 covers scoping requirements in the current ADA Standards for weather shelters.
-
General: ADA Standard Section 222.1
Section 222.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for dressing, fitting, and locker rooms.
-
Salsbury Industries See Through Metal Locker Six Tier Box Style Bridge 16 Box
Requires the Registered User plan or above. Login!
