Section 505.10.3 covers the current ADA Standards for the handrail extensions at the bottom of the stairs.
Search Results "Side Transfer Surface"
Filters
Commonly Searched Documents
-
Bottom Extension at Stairs: ADA Standard Section 505.10.3
-
Top and Bottom Extension at Ramps: ADA Standard Section 505.10.1
Section 505.10.1 covers the current ADA Standards for the top and bottom handrail extensions at ramps.
-
11B.707.7.1.3 Horizontally mounted display screen
60 degrees to 90 degrees (horizontal) from vertical, the center line of the display screen and other display devices shall be no more than 34 inches (864 mm) above the floor or ground surface...
-
11B-505.10.2 Top extension at stairs
Extensions shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent stair flight....
-
SIDEWALK
[DSA-AC] A surfaced pedestrian way contiguous to a street used by the public. (As differentiated from the definition of “Walk”.) Advisory Definition of SIDEWALK....
-
Issue 5: Tactile arrow (in line)
Figure 13: APS installed on poles in the landscape strip, and still within reach from a level paved sidewalk surface....
-
Protruding Objects and Trails
Objects that extend into the travel way of a trail from the side or from overhead can be hazardous to people who are paying more attention to their companions than the travel route (figure...
-
Protruding Objects
Protruding Objects Common Problem: In areas inside and outside the lodging facility where people are expected to walk, objects protrude too far from the side, from posts, or hang down...
-
AJW Architectural Products U852 Dual Stall Seat Cover Dispenser - Partition Mounted
satin finish Holds 500 seat covers Seat cover dispenser is partition mounted Product Specs Body: Fabricated of #22 gauge stainless steel with a #4 satin finish on all exposed surfaces...
-
AJW Architectural Products U852H Dual Stall Seat Cover Dispenser w/ Flush Mounting - Partition Mounted
satin finish Holds 500 seat covers Seat cover dispenser is partition mounted Product Specs Body: Fabricated of #22 gauge stainless steel with a #4 satin finish on all exposed surfaces...
-
A. DEFINITIONS AND BACKGROUND
than 8.3%) ramps and curb ramps; -inaccessible patient rooms and toilet rooms; -inaccessible showers; -toilet seats that are mounted too high; -toilets not centered at 18" from the side...
-
410.6 Doors and Gates
Side doors and gates shall provide a clear width 42 inches (1065 mm) minimum....
-
4.34.6.8* REFRIGERATOR/FREEZER
Provision shall be made for refrigerators which are: (1) Of the vertical side-by-side refrigerator/freezer type; or (2) Of the over-and-under type and meet the following requirements...
-
11B-705.1.2.2.1 Perpendicular curb ramps
Detectable warnings shall extend the full width of the ramp run less 2 inches (51 mm) maximum on each side, excluding any flared sides....
-
6. Grab Bars
Is there a horizontal grab bar at the head of the tub that is at least 12" long for stabilization and aid in transfer from a wheelchair to the fixed tub seat - see Figure 34 on page 25?...
-
Zurn Industries Trap Protector
Antimicrobial, resists thermal transfer, and is ADA compliant. Fits 1 1/2 [38] maximum, tubular and semi-cast P traps....
-
Data Collection Procedures
Within a maximum of one month from each surface installation, a preliminary accessibility assessment of the trail surface was conducted and the surfaces were tested for firmness and stability...
-
Top Landings
Otherwise, maneuvering at the top of ramps would require turning on the flared sides. Landings must also be as wide as the curb ramp they serve....
-
604.8.1.4 Toe Clearance
The front partition and at least one side partition shall provide a toe clearance of 9 inches (230 mm) minimum above the finish floor and 6 inches (150 mm) deep minimum beyond the compartment-side...
-
604.8.1.4 Toe Clearance
The front partition and at least one side partition shall provide a toe clearance of 9 inches (230 mm) minimum above the finish floor and 6 inches (150 mm) deep minimum beyond the compartment-side...
-
T207 Circulation Paths
As a matter of clarification, the proposed rule specified that, where doorways are provided on one side of a non-rail vehicle, an accessible circulation path must connect each wheelchair...
-
R409.2 Where Required
Handrails shall be provided on both sides of ramps and stairways....
-
[2010 ADAS] 105.2.3 ASTM
ASTM F 1292-99 and ASTM F 1292-04 establish a uniform means to measure and compare characteristics of surfacing materials to determine whether materials provide a safe surface under and...
-
ASTM
ASTM F 1292 establishes a uniform means to measure and compare characteristics of surfacing materials to determine whether materials provide a safe surface under and around playground equipment...
