Persons with disabilities considered the 34 inch maximum height too high for surfaces used for any length of time....
Search Results "Parking Space Length"
-
Table Surface Height
-
604.5.2 Rear Wall
The rear grab bar shall be permitted to be 24 inches (610 mm) long minimum, centered on the water closet, where wall space does not permit a length of 36 inches (915 mm) minimum due to the...
-
R409.6 Gripping Surface
Handrail gripping surfaces shall be continuous along their length and shall not be obstructed along their tops or sides....
-
Can elevator doors close sooner than the minimum opening time specified when users activate door close?
The 20 second minimum pertains to the length of time the sensory reopening device remains effective, not necessarily the length of time doors remain open....
-
§ 38.23(a) General
At least two securement locations and devices, complying with paragraph (d) of this section, shall be provided on vehicles in excess of 22 feet in length; at least one securement location...
-
d) RecPark Program
The athletic fields, play areas and recreation centers (along with open space that is provided at virtually every park), represent core features that together provide the range of services...
-
11B-234.1 General
A custom designed and constructed ride is new upon its first use, which is the first time amusement park patrons take the ride....
-
11B-234.1 General
A custom designed and constructed ride is new upon its first use, which is the first time amusement park patrons take the ride....
-
G. Completing the Survey and Checklist
For example, if no parking lot is provided at the facility, (such as where only on-street parking is provided), do not measure the size of the on-street parking spaces....
-
Small non-rail vehicle
Non-rail vehicles that are equal to or less than 25 feet (7.6 m) in length....
- KirbyBuilt Providence Picnic Table with Maximum Seating
-
11B-705.1.2.3 Islands or cut-through medians
Exception: Detectable warnings shall be 24 inches (610 mm) minimum in depth at pedestrian islands or cut-through medians that are less than 96 inches (2438 mm) in length in the direction...
-
11B-705.1.2.3 Islands or cut-through medians
Exception: Detectable warnings shall be 24 inches (610 mm) minimum in depth at pedestrian islands or cut-through medians that are less than 96 inches (2438 mm) in length in the direction...
-
PRIORITIES
§36.304(c)(1) First, a public accommodation should take measures to provide access to a place of public accommodation from public sidewalks, parking, or public transportation....
-
ABA CHAPTER 8: SPECIAL ROOMS, SPACES, AND ELEMENTS
[See subsections ...]
-
4. ACCESSIBLE ELEMENTS AND SPACES: SCOPE AND TECHNICAL REQUIREMENTS
[See subsections ...]
-
1132A.5.2 Strike edge maneuvering space at doors
The width of the level area on the side to which the door swings shall extend 18 inches (457 mm) past the strike edge for all doors. The width of the level area at the exterior side...
-
1132A.5.2 Strike edge maneuvering space at doors
The width of the level area on the side to which the door swings shall extend 18 inches (457 mm) past the strike edge for all doors. The width of the level area at the exterior side...
-
Section 2. Accessible route
"Accessible route" means a continuous unobstructed path connecting accessible elements and spaces in a building or within a site that can be negotiated by a person with a severe disability...
-
§100.201 Accessible route
Accessible route means a continuous unobstructed path connecting accessible elements and spaces in a building or within a site that can be negotiated by a person with a severe disability...
-
M305.3.1.3 Vertical Position
The length of the gripping surface on vertical standing supports shall be 18 inches (455 mm) minimum....
-
Slope and Rise [4.8.2]
Slope represents the proportion of vertical rise to horizontal length and can be represented as a ratio (as in ADAAG), percentage, pitch or in degrees....
-
1133A.4, Item 2
A minimum linear length of 30 inches (762 mm) of countertop shall be provided for a work surface....
-
1133A.4, Item 2
A minimum linear length of 30 inches (762 mm) of countertop shall be provided for a work surface....