Carpet Separator thresholds are also used to provide a solid surface for a door sweep or automatic door bottom to close against....
Search Results "ALI: Automatic Location Identification"
- PEMKO 4" Carpet Separator Threshold No. 2364
- PEMKO 1 3/8" Carpet Separator Threshold No. 1951
- PEMKO 1 3/4" Carpet Separator Threshold No. 236
- Stanley QME 100 Series Grade 1 Heavy Duty Mortise Locks
- Stanley QMS 100 Series Grade 1 Heavy-Duty Mortise Locks
- PEMKO 6" Carpet Separator Threshold No. 2366
- Sargent FM7100 Multi-Point Auto Deadlocking Door System
- PEMKO 2 1/2" Carpet Separator Threshold No. 174
- Symmons Naru Tub/Shower Valve S-4100
- Mariak Industries Motorized Window Coverings
-
Where must curb ramps be provided?
Curb ramps must be located to ensure a person with a mobility disability can travel from a sidewalk on one side of the street, over or through any curbs or traffic islands, to the sidewalk...
-
11B-703.6.1 Pictogram field
Characters and Braille shall not be located in the pictogram field. Advisory 11B-703.6.1 Pictogram field. ...
-
1009.3.2 Submerged Depth
Where landings are required by 405.7, at least one landing shall be located 24 inches (610 mm) minimum and 30 inches (760 mm) maximum below the stationary water level....
-
11B-217.4.1 Bank requirement
[2010 ADAS] EXCEPTION: TTYs shall not be required at banks of telephones located within 200 feet (61 m) of, and on the same floor as, a bank containing a public TTY. ...
-
M302.4.1 Clearance in Base
Equipment components are permitted to be located within 8 inches (205 mm) maximum of the centerline of the clearance width....
-
M301.4.1 Clearance in Base
Components of diagnostic equipment are permitted to be located within 8 inches (205 mm) maximum of the centerline of the clearance width....
-
102 Dimensions for Adults and Children
In addition, technical requirements are also provided based on children’s dimensions and anthropometrics for drinking fountains, water closets and other elements located in toilet compartments...
-
703.4.1 Height Above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
-
1015.3 Viewing Space
Each distinct viewing location shall provide a viewing space adjacent to the clear ground space required by 1015.2 through which the point of interest is viewable....
-
Fixtures
None of these fixtures shall be located within the required water closet clearance except as allowed by the Exception to TAS 604.3.2....
-
Protrusions
Where a wheelchair space is located on a ride, nothing may protrude into the front of the wheelchair space 9 inches from the floor....
-
5.4.2.1 Transfer Support Length Recommendation for Stretchers
Figure 5.4.2.1 Transfer Support Location – Side View (SOURCE: Stryker Medical)...
-
Pit Toilets [F213.1, Exception]
F247.4.4 requires routes connecting pit toilets located along a trail to comply with the technical requirements in 1017 only if the trail complies with 1017....
-
Picnic Units With Mobility Features [F245.2.1 and F245.2.2]
Entities should provide information on the location of picnic units with mobility features on Web sites, in brochures, and at bulletin boards or information kiosks at the picnic facility...