"Slope" means the relative steepness of the land between two points and is calculated as follows: The distance and elevation between the two points (e.g., an entrance and a passenger loading...
Search Results "Vista Point"
-
Section 2. Slope
-
TEST NO. 3 – UNUSUAL CHARACTERISTICS TEST
site characteristics result in a difference in finished grade elevation exceeding 30 inches (762 mm) and 10 percent measured between an entrance and all vehicular or pedestrian arrival points...
-
11B-233.3.1.2.6.4 Test number three, unusual characteristics test
site characteristics result in a difference in finished grade elevation exceeding 30 inches (762 mm) and 10 percent measured between an entrance and all vehicular or pedestrian arrival points...
-
Definition [F106.5]
A viewing area is an outdoor space developed for viewing a landscape, wildlife, or other points of interest....
-
Minimum Tread Width
The width of the usable part of the tread width at the narrowest point on a trail....
-
Viewing Area
An outdoor space developed for viewing a landscape or point of interest such as a mountain range, a valley, or a waterfall....
-
Minimum Trail Width
The width of the trail tread and the adjacent usable surface at the narrowest point on a trail. ...
-
§100.201 Entrance
Entrance means any access point to a building or portion of a building used by residents for the purpose of entering....
-
11B-221.2.3.2 Vertical dispersion
In bleachers, wheelchair spaces shall not be required to be provided in rows other than rows at points of entry to bleacher seating....
-
11B-221.2.3.2 Vertical dispersion
In bleachers, wheelchair spaces shall not be required to be provided in rows other than rows at points of entry to bleacher seating....
-
11B-221.2.3.2 Vertical dispersion
In bleachers, wheelchair spaces shall not be required to be provided in rows other than rows at points of entry to bleacher seating....
-
Coverage and Definition of “Flight”
When there is a change in both aircraft and flight number at a foreign airport, the rule would not apply beyond that point....
-
608.2.1 Transfer Type Shower Compartments
Transfer type shower compartments shall be 36 inches (915 mm) by 36 inches (915 mm) clear inside dimensions measured at the center points of opposing sides and shall have a 36 inch (915...
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding No Weight - Side Approach Power Chair
in the lateral or sideways reach direction for a given (a) height from the floor (shown the vertical axis) and (b) offset distance (shown on the horizontal axis) from the lateral-most point...
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding No Weight - Side Approach Manual Wheelchair
in the lateral or sideways reach direction for a given (a) height from the floor (shown the vertical axis) and (b) offset distance (shown on the horizontal axis) from the lateral-most point...
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding No Weight - Side Approach Scooter
in the lateral or sideways reach direction for a given (a) height from the floor (shown the vertical axis) and (b) offset distance (shown on the horizontal axis) from the lateral-most point...
-
Vanpool
Vanpools are used for daily work trips, between commuters' homes (or collection points near them) and work sites (or drop points near them)....
-
907.4.2.2 Height
The height of the manual fire alarm boxes shall be not less than 42 inches (1067 mm) and not more than 48 inches (1219 mm) measured vertically, from the floor level to the highest point...
-
907.4.2.2 Height
The height of the manual fire alarm boxes shall be not less than 42 inches (1067 mm) and not more than 48 inches (1219 mm) measured vertically, from the floor level to the highest point...
-
11B-1008.4.5 Transfer supports
Where play components require transfer to entry points or seats, at least one means of support for transferring shall be provided....
-
1008.4.5 Transfer Supports
Where play components require transfer to entry points or seats, at least one means of support for transferring shall be provided....
-
1008.4.5 Transfer Supports
Where play components require transfer to entry points or seats, at least one means of support for transferring shall be provided....
-
5.2.3 Transfer Surface Measurement
The transfer surface should be measured from the center-point of each side of the transfer surface....
-
C101.3 Conventional Industry Tolerances
Dimensions are subject to conventional industry tolerances except where dimensions are stated as a range with specific minimum or maximum end points....