are required on curb ramps at transit facilities covered by DOT’s Standards (facilities used by state and local governments to provide designated public transportation services, such as rail...
Search Results "Rail Platform"
-
Detectable Warnings [§406.8 (DOT’s Standards), §705]
-
§ 38.23(b)(5) Platform barriers
(5) Platform barriers....
-
Tent Pads and Tent Platforms [1013]
Tent pads and tent platforms are defined spaces with prepared surfaces for setting up and securing tents....
-
Play Areas: ADA Standard Section 206.7.8
Section 206.7.8 covers the most current ADA Standards for platform lifts used to connect accessible routes to play areas.
-
§ 38.81(a)
doorway with a lift, ramp or bridge plate immediately adjacent to the driver shall have, when the door is open, at least 2 foot-candles of illumination measured on the step tread or lift platform...
-
Recommendations
Recommendations Based on the data in Table 1 and the observations above, we recommend: a minimum flat surface of 40 in. length for platforms accommodating wheeled mobility devices...
-
§ 38.93(d) Coordination with boarding platform
(d) Coordination with boarding platform—...
-
4.11.1 LOCATION
Platform lifts permitted by 4.1 shall comply with the requirements of 4.11....
-
4.11.1 Location
Platform lifts (wheelchair lifts) permitted by 4.1 shall comply with the requirements of 4.11....
-
11B-810.6 Rail station signs
Rail station signs shall comply with Section 11B-810.6. Exception....
-
11B-810.6 Rail station signs
Rail station signs shall comply with Section 11B-810.6. Exception....
-
11B-810.6 Rail station signs
Rail station signs shall comply with Section 11B-810.6....
-
4.11.2 OTHER REQUIREMENTS
If platform lifts are used, they shall comply with 4.2.4, 4.5, 4.27, and the applicable safety regulations of administrative authorities having jurisdiction....
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
§ 37.93 One car per train rule
[See subsections ...]
-
Section 37.101 Purchase or Lease of Non-Rail Vehicles by Private Entities Not Primarily Engaged in the Business of Transporting People
Section 37.101 Purchase or Lease of Non-Rail Vehicles by Private Entities Not Primarily Engaged in the Business of Transporting People [sic]...
-
A4.11.2 Other Requirements
Inclined stairway chairlifts, and inclined and vertical platform lifts (wheelchair lifts) are available for short-distance, vertical transportation of people with disabilities....
-
11B-705.2 Detectable directional texture
Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm), with bars...
-
11B-705.2 Detectable directional texture
Detectable directional texture at transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm), with bars...
-
11B-407.4.10.3 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the support rail, fastener, mounting device...
-
11B-407.4.10.3 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the support rail, fastener, mounting device...
-
Clear Floor or Ground Space: ADA Standard Section 1005.4
At each location where there are railings, guards, or handrails complying with 1005.2.1, a clear floor or ground space complying with 305 shall be provided....