No. 49 CFR Part 38 continues to require that lifts have a minimum design load of 600 pounds and the lift platform accommodates a wheelchair measuring 30 inches by 48 inches....
Search Results "On-Board Wheelchair"
Commonly Searched Documents
-
Are transportation operators required to retrofit their vehicles to accommodate larger and heavier wheelchairs?
-
Are transportation operators required to retrofit their vehicles to accommodate larger and heavier wheelchairs?
No. 49 CFR Part 38 continues to require that lifts have a minimum design load of 600 pounds and the lift platform accommodates a wheelchair measuring 30 inches by 48 inches....
-
Lines of Sight Over Seated Spectators: ADA Standard Section 802.2.1
Where spectators are expected to remain seated during events, spectators in wheelchair spaces shall be afforded lines of sight complying with 802.2.1....
-
11B-802.2.2 Lines of sight over standing spectators
Where spectators are expected to stand during events, spectators in wheelchair spaces shall be afforded lines of sight complying with Section 11B-802.2.2....
- Detectable Warning Systems, Inc. AlertCast® Detectable Warning
- Detectable Warning Systems, Inc. AlertTile® Detectable Warning
- Detectable Warning Systems, Inc. EZ Set Tile™
- SafetyStepTD Ramp-Up Detectable Warning System
- SafetyStepTD Powerbond Detectable Warning Mat
-
11B-802.2.1 Lines of sight over seated spectators
Where spectators are expected to remain seated during events, spectators in wheelchair spaces shall be afforded lines of sight complying with Section 11B-802.2.1....
-
Folding Seats on Equipment Used by Patients Seated in a Wheelchair (M302.4 Exception)
M302.4 includes an exception for diagnostic equipment that is designed for use by patients seated in a wheelchair and provides a folding seat....
-
12162(a)(3)(A)(i)(I)
(I) to park and secure wheelchairs (to accommodate individuals who wish to remain in their wheelchairs) equal to not less than one-half of the number of single-level rail passenger coaches...
-
Side Entry: ADA Standard Section 1002.4.4.2
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
-
221.2 Wheelchair Spaces
221.2 Wheelchair Spaces. Wheelchair spaces complying with 221.2 shall be provided in assembly areas with fixed seating....
-
Wheelchair Seating Locations
ADAAG requires that lines of sight provided for people using wheelchair locations in assembly areas be comparable to those for the general public....
-
§ 38.83(b)(2)(i) Requirements
(i) Requirements. The controls shall be interlocked with the vehicle brakes, propulsion system, or door, or shall provide other appropriate mechanisms or systems, to ensure that the...
-
§ 38.23(b)(10) Platform movement
(10) Platform movement. No part of the platform shall move at a rate exceeding 6 inches/second during lowering and lifting an occupant, and shall not exceed 12 inches/second during...
-
§ 38.83(a)
(a)
-
M303.2.3 Depth (Section-by-Section Analysis)
In the preamble in the MDE NPRM, the Access Board noted it was considering increasing the minimum depth for wheelchair spaces entered from the front or rear to 58 inches and sought input...
-
§382.129 What other requirements apply when passengers' wheelchairs, other mobility aids, and other assistive devices must be disassembled for stowage?
[See subsections ...]
-
11B-604.8.1.1.1 Maneuvering space with in-swinging door
In a wheelchair accessible compartment with an in-swinging door, a minimum 60 inches (1524 mm) wide by 36 inches (914 mm) deep maneuvering space shall be provided in front of the clearance...
-
810.2.2 Dimensions--Modification to 810.2.2 of Appendix D to 36 CFR Part 1191
810.2.2 Dimensions--Modification to 810.2.2 of Appendix D to 36 CFR Part 1191 Bus boarding and alighting areas shall provide a clear length of 96 inches (2440 mm), measured perpendicular...
-
Companion Seats: ADA Standard Section 802.3
Companion seats shall comply with 802.3.
-
11B-802.3 Companion seats
Companion seats shall comply with Section 11B-802.3.