Treads and Riser Specifications in the ADA Standards (§504) Nosing Specifications...
Search Results "Tread"
Filters
Commonly Searched Documents
-
Treads and Riser Specifications in the ADA Standards (§504)
-
R408.2 Treads and Risers
R408.2 Treads and Risers. All steps on a flight of stairs shall have uniform riser heights and uniform tread depths....
-
Treads & Risers
[ADA Stds. 4.9] Yes __ No __ N/A __ Comments: ___________________________________________ ...are all stair treads the same depth (at least 11" deep), measured riser to riser, to prevent...
-
1011.5.2 Riser height and tread depth
... Exceptions: 4. See California Fire Code Chapter 11 and California Existing Building Code for the replacement of existing stairways. [DSA-AC] For applications listed in...
-
Nosings: ADA Standard Section 504.5
Section 504.5 covers the current ADA Standards for stair nosings.
-
Tread Obstacles on Trails
A tread obstacle is anything that interrupts the evenness of the tread surface. On trails, tread obstacles often occur as a result of ruts, roots, and rocks in the tread surface....
-
1017.3 Clear Tread Width
The clear tread width of trails shall be 36 inches (915 mm) minimum....
-
1017.3 Clear Tread Width
The clear tread width of trails shall be 36 inches (915 mm) minimum....
-
504.2 Treads and Risers
504.2 Treads and Risers. All steps on a flight of stairs shall have uniform riser heights and uniform tread depths....
-
11B-504.4 Tread surface
Stair treads shall comply with Section 11B-302. Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exception: Reserved....
-
Trail Tread
The portion of a trail upon which traffic moves.
-
504.2 Treads and Risers
All steps on a flight of stairs shall have uniform riser heights and uniform tread depths. Risers shall be 4 inches (100 mm) high minimum and 7 inches (180 mm) high maximum....
-
504.2 Treads and Risers
All steps on a flight of stairs shall have uniform riser heights and uniform tread depths. Risers shall be 4 inches (100 mm) high minimum and 7 inches (180 mm) high maximum....
-
Surface and Clear Tread Width on Beach Access Routes
A beach access route must have a firm, stable surface, and have a clear tread width of 60 inches (1,525 millimeters) minimum....
-
Clear Tread Width [1017.3]
The clear tread width of trails must be a minimum of 36 inches (figure 2)....
-
1009.7 Stair treads and risers
1009.7 Stair treads and risers. ......
-
4.9.2 Treads and Risers
On any given flight of stairs, all steps shall have uniform riser heights and uniform tread widths....
-
11B-504.5 Nosings
The radius of curvature at the leading edge of the tread shall be ½ inch (12.7 mm) maximum....
-
Wooster Products Spectra Safety Treads (WP3C)
2D Drawing Section of Stair Tread...
-
Wooster Products Supergrit Safety Treads (231BF)
2D Drawings Section of Stair Tread...
-
Tread Obstacles on Beach Access Routes
Tread obstacles on a beach access route must not be more than 1 inch (25 millimeters) high....
-
2.7 Tread Obstacles
Where tread obstacles exist on the surface of an ORAR, they shall not exceed 1 inch (25 mm) in height....
-
American Stair Corp. FasTrack Treads & Landings
FasTrack® treads combine slip resistance with economy. More sound dampening than a traditional Checker Plate tread, FasTrack® is ideal for either indoor or outdoor use....
-
Wooster Products Supergrit Safety Treads (231BF)
Supergrit Treads Provide... A heat treated, corrosion resistant, extruded aluminum base with satin/lacquered finish....
