In existing buildings and facilities where not all entrances comply with Section 11B-404, entrances complying with Section 11B-404 shall be identified by the International Symbol of Accessibility...
Search Results "Shall"
-
Re: 11B-216.6 Entrances
-
Exception for accessible means of egress in existing buildings in IBC 2000
Accessible means of egress shall comply with Sections 1003.2.13.1 through 1003.2.13.7.1. Accessible spaces shall be provided with not less than one accessible means of egress....
-
Parking sign height measurement technique
502.6 says "Signs shall be 60 inches (1525 mm) minimum above the finish floor or ground surface measured to the bottom of the sign." But which floor or ground surface? ...
-
Fur out the wall
The water closet shall be positioned with a wall or partition to the rear and to one side....
-
California: Toilet Grab Bars - Uneven height allowed?
Grab bars for water closets shall comply with Section 11B-609. Grab bars shall be provided on the side wall closest to the water closet and on the rear wall....
-
Excel Dryer, Inc. CAST Cover Series HANDS OFF® Automatic Sensor Activated Hand Dryers
It shall be insulated by a resilient mounting and shall be protected by a self-resetting thermal switch....
-
Willoughby Industries HS-1014-96-HC 18" wide Lavatory
Lavatory shall be Willoughby Model No. HS-1014-96-HC. Fixture shall be fabricated from 14 gauge, type 304 stainless steel....
-
American Specialties Single Robe Hook 7340
Single Robe Hook shall be fabricated of stainless steel alloy 18-8, type 304....
-
Willoughby Industries ASETW1490FM Ligature-Resistant Floor Mounted Blowout Series Water Closet
Ligature-resistant floor mounted toilet shall be Willoughby Model No....
-
Willoughby Industries ADA Cabinet Shower US-FA-HC
Cabinet shower shall be: Willoughby Model No. S- 3636-HC. Shower cabinet shall be fabricated from 14 gauge, type 304 stainless steel....
-
Excel Dryer, Inc. LEXAN® Series Hand Dryers
Dryers shall have a chrome-plated. die-cast zinc blower vent/grill (air outlet) which shall be fixed to the blower housing and shall be of a design that will not allow foreign objects to...
-
Willoughby Industries DF-1015-96-HC Rear Mounted Drinking Fountain
DF-1015-96-HC: Fixture shall be fabricated from 14 gauge, type 304 stainless steel....
-
Excel Dryer, Inc. CAST Cover Series HANDS ON® Push Button Activated Hand Dryers and Hair Dryers
Wall plate shall be fastened to the wall box by four concealed 1/4" (6mm) mounting bolts, and shall be equipped with three (3) 7/8" (22mm) diameter holes, one of which shall be suitable...
-
Building Directories
Signs shall be provided in accordance with 216 and shall comply with 703. EXCEPTIONS 1....
-
Willoughby Industries ETW-1445-BS-HC Toilet for 45-degree Chase Wall
450 chase, wall outlet, blowout toilet shall be: Willoughby Model No. ETW-1445-___...-BS-HC. Fixture shall be fabricated from 14 gauge, type 304 stainless steel....
-
Willoughby Industries ETW-1490-FM-HC Floor Mounted Blowout Series Water Closet
shall maintain a minimum 2" seal and pass a 2 1/8” ball - Bead blast finish bowl interior Toilet shall be blowout type, requiring 35 psi min. flushing pressure....
-
Healthcraft Invisia ADA Serenaseat™ Folding Shower Seat
Product Specification The shower seat shall have a Brazilian Walnut back rest and seating surface. The seating surface shall be 32"/81cm in width....
-
Willoughby Industries ETW-1490-FM-HC Floor Mount Wall Outlet Rear Mounted ADA Blow Out Type Flush Toilet
Fixture shall be fabricated from 14 gauge, type 304 stainless steel. The construction shall be all welded, with exposed stainless surfaces polished to a #4 satin finish....
-
Bobrick Swing-Up Grab Bar B-4998.99
Grab bar shall be type-304 stainless steel with satin finish. Grab bar shall have 18-gauge (1.2mm) wall thickness and 1–1/4" (32mm) outside diameter....
-
Bobrick B-635 Klutch Mobile Device Holder
Wall mounted mobile device holder shall have a type 304 stainless steel front with satin finish. Back plate shall be type 304 stainless steel....
-
Willoughby Industries ASETWS-1490-FM-HC Ligature-Resistant Floor Mounted Siphon Jet Water Closet
The construction shall be all welded, with exposed stainless surfaces polished to a #4 satin finish....
