Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
Search Results "Road Surface Treatment"
Filters
Commonly Searched Documents
-
11B-308.3.1 Unobstructed
-
Issue 9: Reach (how far?)
The APS shown in Figure 13 are appropriately located within the landscape strip, reachable from a paved level surface, and aligned with the crosswalk lines....
-
Q3.) What are the types of “manufacturing processes” that were anticipated where the advisory says “tolerances recognized by this provision include… “those that may be a necessary consequence of a particular manufacturing process”?
Similarly, the surfaces of ceramic tiles that form the wall behind a grab bar will not be perfectly flat due the manufacturing processes that make them. ...
-
Seats
The deck surface between the centerline of the seat and the pool edge cannot have a slope greater than 1:48....
-
R105 Definitions (Section-by-Section Analysis)
ramp, element, facility, grade break, operable part, pedestrian access route, pedestrian circulation path, public right-of-way, qualified historic facility, running slope, and vertical surface...
-
Supporting Documents for the Medical Diagnostic Equipment Accessibility Standards Advisory Committee Report
Chairs Subcommittee Report - Imaging Equipment Subcommittee Report - Mammography Subcommittee Report - Stretchers Subcommittee Report - Weight Scales IDeA Center Memo – Transfer Surface...
-
FEATURES
Beds, stretchers, and other types of equipment will have unique features that determine the shapes of their patient support surfaces....
-
1009.4.5 Grab Bars
The top of the gripping surface shall be 4 inches (100 mm) minimum and 6 inches (150 mm) maximum above transfer walls....
-
11B-1009.4.5 Grab bars
The top of the gripping surface shall be 4 inches (102 mm) minimum and 6 inches (152 mm) maximum above transfer walls....
-
Edge Protection
Recommendation: At narrow routes in particular, consider maintenance of adjacent surfaces as raised or flush or wider route widths in consideration of minimum maneuvering and passage requirements...
-
Temporary Suspension
reflecting pools [4.29.6] Detectable warnings are not prohibited by this suspension; jurisdictions may continue to install the truncated domes specified in ADAAG or other surfaces...
-
Landings [4.8.4]
It is recommended that landings of exterior ramps be drained so that water does not accumulate on the surface....
-
C. Defendants' Transaction Counter
But “[b]ecause of the cash registers and merchandise displays . . . defendant does not provide a 36-inch-long clear counter surface.” Id....
-
Stairs
At the top, the extension shall be parallel with the floor or ground surface....
-
Inpro ENDURANT® Shower Receptors
Key Specifications Solid pour of non-porous, BioPrism® Solid Surface homogeneous material....
-
Wikk Industries Inc. Bollard With Push Plate PART#BPR SM AINS 32D (630)
Surface mount with concealed mounting base. Recessed area for N4x4S Surface Mount Box for with 4x4-5 US32D (630). Welded Angle top (front slant-45 degree)....
-
III. Enforcement and Implementation
Cohen and Wolf, P.C. 320 Post Road West Westport, CT 06880 Facsimile: (203) 394-9901 To CI: Connecticut Innovations, Inc. 865 Brook Street Rocky Hill...
-
(C) NYCT’s interpretation of the ADA and DOT’s implementing regulations is too narrow.
See 49 CFR § 37.43(a)(1); SEPTA II, 635 F.3d at 93–98. 1 This argument was raised by NYCT in its letter dated December 15, 2014 to FTA Region 2 regarding the Middletown Road Station...
-
Federal Agencies
Federal Motor Carrier Safety Administration – Administers ADA regulations requiring accessible, timely Over-the-Road Bus service for passengers with disabilities....
-
11B-606.2 Clear floor space
clearance of 24 inches (610 mm) minimum above the finish floor or ground shall be permitted at lavatories and sinks used primarily by children 6 through 12 years where the rim or counter surface...
-
Bradley 2.8 Gallon Waste Receptacle
Model 3251, 3251-10, 3251-11 Model 3251 - Recessed Model 3251-10 - Semi-recessed (recesses 2"; projects 2") Model 3251-11 - Surface Mounted (projects 4")...
-
Trench Drain SSB 5038TR .75 Base
48" x 36" accessible solid surface transfer shower base with integral trench drain....
