M01.4.1 Clearance in Base Proposed requirement: The base of the equipment shall provide a clearance 44 inches (1120 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor...
Search Results "Floor Destination Indicator"
Filters
Commonly Searched Documents
-
M301.4 Lift Compatibility
-
Display Screens
suggested that we change the requirement for display screens such that they must not only be visible, but also readable, from a point located 40 inches (1015 mm) above the center of the clear floor...
-
4.1.3(5)*
For example, floors above or below the accessible ground floor must meet the requirements of this section except for elevator service....
-
Required Means of Egress [IBC §1007.1 (2003), §1003.2.13 (2000)]
The IBC (2003) permits one accessible means of egress from: wheelchair seating in assembly areas with sloped floors where the common path of travel meets aisle requirements for...
-
Transfer Heights
that the majority of WMDs (92% of subjects in the first phase and the 5th percentile (or approximately 94% in this study) could transfer within one inch of the mean wheelchair seat to floor...
-
BS8300:2001 Research
They include information on space required for “kneeholes,” reaching abilities of wheeled mobility users, clear floor area space requirements and maneuvering clearances....
-
A. Arena Assembly Seating:
The floor surface of the companion seat shall be at the same elevation as the floor surface of the wheelchair space....
-
11B-604.5.1 Side wall
A bath station that can be activated by a patient lying on the floor shall be provided at each room containing a patient water closet, bathtub, sitz bath, or shower stall....
-
11B-404.2.9 Door and gate opening force
is 35 inches (889 mm) minimum above the floor or ground surface....
-
Running Slope of Ramps Deployed to Roadways or Curb-Height Bus Stops
Standard transit buses had high floors (usually 35 inches above the roadway) and steps at doorways....
-
American Dryer, Inc Wall Guard Accessory
Dramatically reducing moisture on walls and floors, new patent-pending Wall Guard is ADA compliant, achieving the four-inch-or-less unit protrusion guidelines without the need to recess...
-
Unity Surfacing Systems Pave-Land 1 1/2" and 1 3/4" thick Interlocking Tiles
Pave-Land is "Unity's" 1 1/2" and 1 3/4" thick interlocking, unitary, rubberized safety surfacing, flooring and paver products that are made from 100% recycled tires and rubber granules...
-
Cybex Total Access Recumbent Bike
This allows fitness enthusiasts who have physical or sensory limitations to take advantage of fitness training on the same gym floor and using the same equipment as those who do not....
-
Section 36.406(e) Housing at a Place of Education
Although the 2004 ADAAG contains provisions for both residential facilities and transient lodging, the guidelines do not indicate which requirements apply to housing provided in an educational...
-
Access-Able Designs Adult Dressing Bench D-101-42
Stainless steel frame holds up to 900 lbs. with proper mounting and sufficient flooring (ADA 4.26.3 is only 250 lbs.)...
-
II. Rulemaking History
requirements relate to, among other things, ramps and lifts, onboard circulation, wheelchair spaces and securement devices, priority seats, stop request systems, and exterior route or destination...
-
§ 382.45 Passenger information
the aircraft to accommodate qualified individuals with disabilities, including limitations on the availability of boarding assistance to the aircraft, with respect to the departure and destination...
-
NSS Questions and Concerns
with one end no more than 12 inches from the back wall 33 to 36 inches above the floor?...
-
ANSI/BHMA: ADA Standard Section 105.2.1
Section 105.2.1 of the ADA Standards cover references to the ANSI/BHMA standards for door durability, strength, and performance.
-
Elkay Cane Apron LKAPR1 for use with SwirlFlo® Bi-level Drinking Fountains
This apron provides the mandatory 27" (686mm) floor to underside requirement, when properly installed....
-
Access-Able Designs Shower Transfer Bench SH-420-2SDL
Stainless steel frame holds over 900 lbs. with proper mounting and sufficient flooring (ADA 4.26.3 is only 250 lbs.)...
-
Kohler San Tropez® Vertical Spray Bidet with 4 Faucet Holes
Installation Above- or below-floor rough-in...
-
11B-805.6 Hand washing fixtures, lavatories and sinks
Section 11B-306.3.3, Exception 1 which states: "At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor...
-
11B-217.4.1 Bank requirement
[2010 ADAS] EXCEPTION: TTYs shall not be required at banks of telephones located within 200 feet (61 m) of, and on the same floor as, a bank containing a public TTY. ...
