The procedures are based on a draft national standard test method for the firmness and stability of ground and floor surfaces (RESNA 2000), which uses an average of five readings....
Search Results "Floor Destination"
-
Test Procedures
-
1.0 APPLICATION
Where existing individual site furnishings are altered or replaced, the floor or ground surface under or around them is not required to be altered solely because an accessible furnishing...
-
Cavity Sliders CL100 ADA LaviLock Hardware Set with 'Vacant / In Use' Indicator
including Emergency Release CL100 Mortise Lock Case IMPORTANT: Operable parts of hardware must be mounted 34 inches (865mm) minimum and 48 inches (1220 mm) maximum above the finished floor...
-
Smith System Trespa Planner Science Table 30″ Deep 11288
The 1″ adjustable leveling glides provide stability on uneven floors. A science classroom demands compliance with strict codes and standards....
-
Horton Automatics ICU/CCU Bi-Fold/Bi-Swing™ Door System
Standard system features include: Trackless floor design for unobstructed flow and expedient traffic management Low profile 2-3/4" header for aesthetic appeal Choice...
-
D. Reasonable Modifications
However, some people have disability-related needs for cots to be modified or may need to sleep on cots or beds instead of on mats placed on the floor....
-
Character Height: ADA Standard Section 703.5.5
Table 703.5.5 Visual Character Height Height to Finish Floor or Ground From Baseline of Character Horizontal Viewing Distance Minimum Character Height 40 Inches...
-
Construction and Manufacturing Tolerances: ADA Standard Section 104.1.1
Section 104.1.1 of the ADA Standards covers the most current information on dimensions in regards to construction and manufacturing tolerances in the ADA Standards.
-
11B-206.2.4 Spaces and elements
benches, clerks' stations, bailiffs' stations, deputy clerks' stations, and court reporters' stations shall not be required to provide vertical access provided that the required clear floor...
-
11B-206.2.4 Spaces and elements
benches, clerks' stations, bailiffs' stations, deputy clerks' stations, and court reporters' stations shall not be required to provide vertical access provided that the required clear floor...
-
Toilet Rooms and Bathing Rooms: ADA Standard Section 213.2
Section 213.2 covers scoping requirements in the current ADA Standards for toilet rooms and bathing rooms.
-
M301.3.1 Transfer Supports
Figure 5.3-10: Illustration of a concept (not to scale) for a detachable floor mounted support....
-
B. The ADA Standards for Accessible Design
A portion of the counter surface that is 36 inches (915 mm) long minimum and 36 inches (915 mm) high maximum above the finish floor shall be provided....
-
Table of Contents
Play Areas 241 Saunas and Steam Rooms 242 Swimming Pools, Wading Pools, and Spas 243 Shooting Facilities with Firing Positions CHAPTER 3: BUILDING BLOCKS 301 General 302 Floor...
-
Mannington Mills Boucle Collection Commercial Carpet
We make beautiful floors, with Mannington's well-known standards for quality built into every product. ...
-
Willoughby Industries WAW-2311 AquaWave® Single Station Solid Surface Lavatory System
A floor kit is available for an installation that requires an on-floor pedestal....
-
Panda S.90 All Aluminum Slim Profile Multi-Slide Door System
It can be either surface mounted on the finish floor or set directly on the subfloor for an even, recessed finish....
-
Panda TS.83 Thermally Broken Multi-Slide Door System
It can be either surface mounted on the finish floor or set directly on the subfloor for an even, recessed finish....
-
Panda TS.87 Thermally Broken Slim Profile Lift & Slide System
Recessed into sub-floor to ensure the smoothest possible operation. The finished floor is laid in between tracks leaving only a 3/16″ rail exposed....
-
Panda TS.19 Thermally Broken Lift & Slide System
Recessed into sub-floor to ensure the smoothest possible operation. The finished floor is laid in between tracks leaving only a 3/16″ rail exposed....
-
1007.9 Signage
Each door providing access to an area of refuge from an adjacent floor area shall be identified by a sign stating: AREA OF REFUGE. 2....
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
The symbol shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured from the centerline of the symbol....
-
Ground Surfaces
Section 1008.2.6 of the 2010 Standards provides technical requirements for accessible ground surfaces for play areas on accessible routes, clear floor or ground spaces, and turning spaces...
-
11B-220.2 Point-of-sale devices
Where point-of-sale devices are provided at check stands and sales and service counters, they shall comply with Section 11B-707.9.1, and shall also comply with Sections 11B-707.2 _|Clear Floor...
