Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (279 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
Search Results "Clear Deck Space"
-
11B-1008.4.4 Entry points and seats
-
11B-1008.4.4 Entry points and seats
Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (279 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
-
Tent Pads and Tent Platforms
Provide a minimum 48-inch (1,220-millimeter) clear floor or ground space on all sides of tents on tent pads and platforms that are required to be accessible....
-
Integralift Fixed Ceiling Lift Short Instructional Video
"Space for living -space for work" it looks nice in the room and is out of way -and when it is needed it available....
-
1005.2.1 Height
At least 25 percent of the railings, guards, or handrails shall be 34 inches (865 mm) maximum above the ground or deck surface....
-
1005.2.1 Height
At least 25 percent of the railings, guards, or handrails shall be 34 inches (865 mm) maximum above the ground or deck surface....
-
Delta Single Handle High-Arc Lavatory Faucet 559HA-DST
Product Features and Benefits Spout swivels 360° 5 9/16" long, 8 7/8" high 5 3/4" from deck to spout Red/blue indicator Metal lever handle Push pop-up with overflow holes...
-
DIVISION 8: SPECIAL ROOMS, SPACES AND ELEMENTS
[See subsections ...]
-
A4.26.2 Size and Spacing of Grab Bars and Handrails
This specification allows for alternate shapes of handrails as long as they allow an opposing grip similar to that provided by a circular section of 1‒1/4 in to 1‒1/2 in (32 mm to 38...
-
A4.26.2 SIZE AND SPACING OF GRAB BARS AND HANDRAILS
This specification allows for alternate shapes of handrails as long as they allow an opposing grips similar to that provided by a circular section of 1-1/4 in to 1-1/2 in (32 mm to...
-
ADA Compliance BRIEF: Restriping Parking Spaces
U.S. Department of Justice Civil Rights Division Disability Rights Section
-
DIVISION 8: SPECIAL ROOMS, SPACES, AND ELEMENTS
[See subsections ...]
-
1003.3 Clearances
Although the minimum width of the clear pier space is 60 inches (1525 mm), it is recommended that piers be wider than 60 inches (1525 mm) to improve the safety for persons with disabilities...
-
1003.3 Clearances
Although the minimum width of the clear pier space is 60 inches (1525 mm), it is recommended that piers be wider than 60 inches (1525 mm) to improve the safety for persons with disabilities...
-
R405.3.3 Minimum Required Depth
Where knee clearance is required under an element as part of a clear space, the knee clearance shall be 280 mm (11 in) deep minimum at 230 mm (9 in) above the finish surface, and 205 mm...
-
1008.4.4 Entry Points and Seats
Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (280 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
-
4.2.5* Forward Reach
If the clear floor space only allows forward approach to an object, the maximum high forward reach allowed shall be 48 in (1220 mm) (see Fig. 5(a))....
-
Parallel Curb Ramps (R304.3) (Section-by-Section Analysis)
A turning space must be provided at the bottom of parallel curb ramps....
-
Whitehall Mfg. Single Temp Hemispherical Pushbutton Pneumatic Valve, Conical Faucet, 8” Centerset
The Ligature Resistant Faucet is arranged to be mounted to the deck of the lavatory. Faucet assembly requires two 1-1/2" diameter holes on 8" centerset....
-
Aluminum Swaged SG Series Pressure-Locked Grating
By using the most modern technology available, swaged bar grating allows for a variety of spacings including those that conform to the "Americans with Disabilities Act"....
-
Whitehall Mfg. Hot & Cold Hemispherical Pushbuttons Pneumatic Valve Conical Faucet 8" Centerset
The Ligature Resistant Faucet is arranged to be mounted to the deck of the lavatory. Faucet assembly requires three 1-1/2" diameter holes on 8" centerset....
-
Whitehall Mfg. Hot & Cold Hemispherical Pushbuttons Pneumatic Valve Conical Faucet 4" Centerset
The Ligature Resistant Faucet is arranged to be mounted to the deck of the lavatory. Faucet assembly requires (3) 1-1/2" diameter holes on 4" centerset....
-
Whitehall Mfg. 3374-8IN Hot & Cold Hemispherical Pushbuttons Pneumatic Valve Conical Faucet 8" Centerset
The Ligature Resistant Faucet is arranged to be mounted to the deck of the lavatory. Faucet assembly requires three 1-1/2" diameter holes on 8" centerset....
