No. 49 CFR Part 38 continues to require that lifts have a minimum design load of 600 pounds and the lift platform accommodates a wheelchair measuring 30 inches by 48 inches....
Search Results "ASID: American Society of Interior Designers"
Filters
Commonly Searched Documents
-
Are transportation operators required to retrofit their vehicles to accommodate larger and heavier wheelchairs?
-
12207(c)(2) "Wheelchair" defined
(2) "Wheelchair" defined For purposes of paragraph (1), the term "wheelchair" means a device designed solely for use by a mobility-impaired person for locomotion, that is suitable for...
-
§8.3 Historic properties
Historic properties means those properties that are listed or are eligible for listing in the National Register of Historic Places, or such properties designated as historic under a statute...
-
§104.35(b)(2)
(2) Tests and other evaluation materials include those tailored to assess specific areas of educational need and not merely those which are designed to provide a single general intelligence...
-
Complete complaint (Section-by-Section Analysis)
"Complete complaint" is defined to include all the information necessary to enable the Federal agency designated under subpart G as responsible for investigation of a complaint to initiate...
-
1002.5.1 Clear Floor or Ground Space
A clear floor or ground space complying with 305 shall be provided in the load and unload area adjacent to the amusement ride seats designed for transfer....
-
1134A.8, Item 3
Cabinets under lavatories are acceptable provided the bathroom has space to allow a parallel approach by a person in a wheelchair and the lavatory cabinets are designed with adaptable knee...
-
4.1.7(3)(c)
Such toilet facility may be unisex in design....
-
§100.400(c)(4)
(4) Intimidating or threatening any person because that person is engaging in activities designed to make other persons aware of, or encouraging such other persons to exercise, rights granted...
-
4.1.7(2)(c)
Such toilet facility may be "unisex" in design....
-
1991 Standards
1991 Standards means the requirements set forth in the ADA Standards for Accessible Design, originally published on July 26, 1991, and republished as Appendix D to 28 CFR part 36....
-
§ 38.107(a)
(a) If a restroom is provided for the general public, it shall be designed so as to allow a person using a wheelchair or mobility aid to enter and use such restroom as specified in paragraphs...
-
1134A.8, Item 3
Cabinets under lavatories are acceptable provided the bathroom has space to allow a parallel approach by a person in a wheelchair and the lavatory cabinets are designed with adaptable knee...
-
11B-407.4.6.2 Buttons
Car control buttons with floor designations shall comply with Section 11B-407.4.6.2. Exception: Reserved....
-
Side Entry: ADA Standard Section 1002.4.4.2
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
-
11B-411.2.2.2 Verbal identification
When the accessibility function button is pressed, verbal announcement of the car designation shall be provided at the elevator car entrance upon arrival....
-
11B-1002.4.4.2 Side entry
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
-
A. Statutory and rulemaking history
protects the rights of individuals with disabilities in employment, access to State and local government services, places of public accommodation, transportation, and other important areas of American...
-
SCOPE OF THE INVESTIGATION
The United States Department of Justice (Department) initiated this matter as a compliance review of the City of Waukegan, Waukegan, Illinois under title II of the Americans with Disabilities...
-
11B-233.1 General
Section 233 outlines the requirements for residential facilities subject to the Americans with Disabilities Act of 1990....
-
Alterations: ADA Standard Section 202.3
Section 202.3 covers the most current requirements for alterations in existing building and facilities.
-
Teknion Journal
Designed by Chris Wright and Steve Tsai, Journal is a comprehensive wood casegoods system with a refined modern aesthetic designed to address this need....
-
11B-243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with Section...
-
1009.2.8 Submerged Depth
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (455 mm) minimum below the stationary water level....