Sections 206.2.14 and 237 of the 2004 ADAAG require at least twenty-five percent (25%) of railings at fishing piers and platforms to be no higher than 34 inches high, so that a person seated...
Search Results "Seat Height"
Filters
Commonly Searched Documents
-
Fishing piers and platforms. (Section-by-Section Analysis)
-
Boarding Assistance
are completely immobile, ask carrier personnel to provide a wheelchair to transport you to and from the gate, a lift (if necessary), and assistance transferring from an aisle chair to a seat...
-
Fishing piers and platforms. (Section-by-Section Analysis)
Sections 206.2.14 and 237 of the 2004 ADAAG require at least twenty-five percent (25%) of railings at fishing piers and platforms to be no higher than 34 inches high, so that a person seated...
-
Clear Floor Space: Minimum Clear Floor Space Required - Manual, Power & Scooter
., with the occupant seated in their own wheeled mobility device) when stationary....
-
III-7.7000 Alterations
Entities are permitted to -- (a) Install only one accessible unisex bathroom per floor; (b) Cluster wheelchair seating in altered assembly areas; (c) Use platform lifts as part...
-
Assistive Powered Scooters
These scooters have a tiller for steering and a comfortable seat, usually with a back and armrests....
-
Bathtubs (ADAAG 4.20)
ADA Accessibility Guidelines for bathtubs are predicated on the use of a conventional residential bathtub by individuals who independently transfer from a wheelchair directly to a tub seat...
-
1015.2 Where required
In assembly seating areas at cross aisles in accordance with Section 1029.12. Elevated facility observation station access hatches at detention facilities....
-
11B-1009.2.7 Operation
The lift shall be stable and not permit unintended movement when a person is getting into or out of the seat. [2010 ADA Standards] 1009.2.7 Operation....
-
Inclusion Solutions Voter Entrance Sign
Sign Height: 14" Portable, lightweight signs can solve parking and other Election Day accessibility issues...
-
Magnuson Group SLOPE Waste Receptacles
Available in both a standard height 38-gallon and a “junior height” 32-gallon unit, SLOPE features 3 single top openings [waste, recycling & paper] and 5 double-top openings [combinations...
-
Behavioral Safety Products #FV600 Ligature Resistant Flush Valve Cover
The bottom can be left intact and mounted at existing height, or can be cut off and slid inside the top portion for height adjustment....
-
Toilet Buildings and Pit Toilets
buildings at developed recreation sites with only one riser must comply with the requirements for toilet room size and clearances in section 603 of ABAAS and with the requirements for toilet seats...
-
Inclusion Solutions Accessible Route Sign
Sign Height: 14 inches Portable, lightweight signs can solve parking and other Election Day accessibility issues...
-
Hill-Rom Sabina® II Mobile Lift
Adjustable height levels accommodate patients of most sizes, and those who are sensitive to underarm pressure may use a Comfort SlingBar and ComfortVest™ in combination with Sabina II lift...
-
BTX Intelligent Fashion Motorized Drapery Systems
BTX prides itself on being able to offer the height of design, better heating and air conditioning energy conservation, and the convenient control that patrons have come to know and expect...
-
Just Manufacturing Brass Service Sink Faucet with Hose Thread
Replaceable seats. Adjustable inlet centers (1/4") 1/2" female pipe connections. Cast brass spout with hose end outlet....
-
4. Perspectives of Equipment Types
This has significant implications for adjustable height table design as many design loose mechanical advantage as they go lower....
-
1. Width and Depth of Wheelchair Spaces
Because the final rule also requires raised platforms over 1½ inches in height to provide edge protection that is a minimum of 2 inches high from the surface of the platform (See M303.2.6...
-
II. Rulemaking History
The committee members reached a consensus on all of their recommendations, except for the recommended lowest or minimum height for adjustable-height transfer surfaces....
-
Meeting ANSI Standard S12.60 Requirements
For classrooms where there is no fixed lecture position for the teacher, such as those for lower grades, and where ceiling heights are less than ten feet, the best option is to place most...
-
Road Roughness Measurements
(Figure 8) An inertial profiler uses an accelerometer and a non-contacting sensor, such as a laser transducer, to measure height....
-
III 3.11000 Insurance
ILLUSTRATION: An amusement park requires individuals to meet a minimum height requirement that excludes some individuals with disabilities for certain rides because of a limitation in its...
-
1023.9 Stairway identification signs
comply with Chapter 11B shall be located at the landing of each floor level, placed adjacent to the door on the latch side, in all enclosed stairways in buildings two or more stories in height...
