Where point-of-sale devices are provided at check stands and sales and service counters, they shall comply with Section 11B-707.9.1, and shall also comply with Sections 11B-707.2 _|Clear Floor...
Search Results "Floor Identification"
Commonly Searched Documents
-
11B-220.2 Point-of-sale devices
-
F205.1 General
Floor electrical receptacles shall not be required to comply with 309. 5. HVAC diffusers shall not be required to comply with 309. 6. ...
-
1125B.3
Clothes rods shall be a maximum of 54 inches (1372 mm) from the floor for a side approach (See Figure 11B-5D). ...
-
205.1 General
Floor electrical receptacles shall not be required to comply with 309. 5. HVAC diffusers shall not be required to comply with 309. 6....
-
Visual Busyness (slide 13)
So I think what you have to do is use the contrast on the edges of things to tell you where the edge of the counter is, to tell you where the floor meets the wall, to tell you when something...
-
Study Objectives
Floor space needed for level, highest and lowest height transfers to seats without handhelds, with grab-bars, and with grab bars and a backrest d....
-
New construction and alteration requirements
For example, installing a new display counter, moving walls in a sales area, replacing fixtures, carpet or flooring, and replacing an entry door....
-
224.7 Housing at a place of education
Kitchens within housing units containing accessible sleeping rooms with mobility features (including suites and clustered sleeping rooms) or on floors containing accessible sleeping rooms...
-
4.2 Physical Accessibility Barriers and Solutions
and sign in Place sign check-in equipment on a side table or use a clipboard Install a lower countertop or lower a section of the existing counter Facility has two floors...
-
Mounting Height
Mounting Height ADAAG specifies a signal height 80 inches above the highest floor level within the space or 6 inches below the ceiling, whichever is lower....
-
Living Room
High contrast between the seating, floor, and walls....
-
Door and Gate Hardware [§404.2.7]
must: allow one-hand operation not require tight grasping, pinching, or twisting of the wrist operate with 5 lbf maximum be located 34” to 48” above the floor...
- Panda S.90 All Aluminum Slim Profile Multi-Slide Door System
- Panda TS.83 Thermally Broken Multi-Slide Door System
- Panda TS.87 Thermally Broken Slim Profile Lift & Slide System
- Panda TS.19 Thermally Broken Lift & Slide System
-
Collection of Information: Telecommunications Act Accessibility Guidelines; Annual Reporting Burden
The burden in providing a contact method is in the identification of the contact method for each type of product....
-
2.2 Administrative Requirements.
Identification of its designated Coordinator. See Appendix C. 2.2.4 Self-Evaluations....
-
Summary of Major Provisions
Identification and Maintenance of Accessible Kiosks • Requires carriers and airports to ensure that accessible automated airport kiosks are visually and tactilely identifiable and maintained...
-
25. Evaluation and placement
Under §104.36, a recipient must establish a system of due process procedures to be afforded to parents or guardians before the recipient takes any action regarding the identification, evaluation...
-
B. Survey and Review of Polling Place Locations
The survey instrument includes a requirement to include photographs and the identification of appropriate remedial provisions, including the remedial provisions in Paragraph 15 of this Agreement...
-
Other Hospital-Based Sources of Data
Studies have involved both retrospective examination of ED records and prospective case identification, and have most often targeted a single user category (e.g., inline skate injuries in...
-
Section 1630.2(o) Reasonable Accommodation
For example, suppose a security guard position requires the individual who holds the job to inspect identification cards....