Building/life safety codes set minimum distances between rows of fixed seats with consideration of the number of seats in a row, the exit aisle width and arrangement, and the location of...
Search Results "Fixed Route System"
-
A4.33.3 Placement of Wheelchair Locations
-
Locks and Security Devices
Locks and Security Devices Permanently fixed portions of locks, including key locks, bolts, card readers, and push-button devices with number codes for general use by building occupants...
-
221 Assembly Areas
Substantive changes made in the final rule include: limiting the requirements for wheelchair spaces to assembly areas with fixed seating (221.2) lowering scoping for assembly areas...
-
Access Aisle: ADA Standard Section 502.3
Section 502.3 covers the current ADA Standards for access aisles.
-
5.3 Access Aisles
All accessible fixed tables shall be accessible by means of an access aisle at least 36 in (915 mm) clear between parallel edges of tables or between a wall and the table edges....
-
TRANSIT BOARDING PLATFORM
[DSA-AC] A horizontal, generally level surface, whether raised above, recessed below or level with a transit rail, from which persons embark/disembark a fixed rail vehicle....
-
TRANSIT BOARDING PLATFORM
[DSA-AC] A horizontal, generally level surface, whether raised above, recessed below or level with a transit rail, from which persons embark/disembark a fixed rail vehicle....
-
F216.12 Amusement Rides
for children, amusement rides that are controlled or operated by the rider, and amusement rides without seats, are not required to provide wheelchair spaces, transfer seats, or transfer systems...
-
216.12 Amusement Rides
for children, amusement rides that are controlled or operated by the rider, and amusement rides without seats, are not required to provide wheelchair spaces, transfer seats, or transfer systems...
-
HEWI Stationary Support Rail Duo WARM TOUCH
with cap made of environmentally friendly, chrome-look coated polyamide - wall mounting plate 181 mm high and 130 mm wide - top rail ø 33 mm, bottom rail ø 25 mm - stable three-point fixing...
-
AN INCREASING NUMBER OF HEALTH CARE PROVIDERS ARE TRANSITIONING TO ADJUSTABLE HEIGHT TABLES
height tables, at 25 percent today.20 Conversely, if a new standard lower than 19 inches is established, thereby deeming all current adjustable tables inaccessible, the entire U.S. health system...
-
11B-411.2.3.1 Floor designation signs
Applied plates are acceptable if they are permanently fixed to the jamb....
-
11B-411.2.3.1 Floor designation signs
Applied plates are acceptable if they are permanently fixed to the jamb....
-
Four Specific Situations in which a Seating Accommodation Must be Provided
The four situations are as follows: If the passenger uses an aisle chair to access the aircraft and cannot readily transfer over a fixed aisle armrest, you must provide a seat in...
-
Selecting a TTY
Selecting a TTY Under ADAAG, TTYs can be permanently fixed within or next to phone enclosures. Pay phones with integrated TTYs are available....
-
Symbols of Accessibility [4.30.7]
Consider using: light-on-dark, which is considered more effective than dark-on-light contrast of at least 70 % (light reflectance value) non-glare finishes system-wide...
-
306 Knee and Toe Clearance
Section 306 defines the minimum clearances for knees and toes beneath fixed objects. Few comments addressing this section were received....
-
Vertical Dispersion: ADA Standard Section 221.2.3.2
Section 221.2.3.2 covers scoping requirements in the current ADA Standards for vertical dispersion in assembly areas.
-
Vertical Clearance [§307.4]
Fixed barriers, such as guardrails, are required where the vertical clearance is less than 80” such as at open stairways and along sloped or curved walls....
-
7.1 Basic Understanding of Diagnostic Imaging Equipment
of interacting components, permanently mounted in fixed installations....
-
M302.2.4 Transfer Sides (Section-by-Section Analysis)
Additionally, based on comments and recommendations from the MDE Advisory Committee, the Access Board has decided to add an exception to this provision to accommodate chairs with fixed footrests...
-
Technical Memorandum TM 2013-14 Dining Surfaces
TM 2013-14 Dining Surfaces Effective Date: June 1, 2013 2012 TAS Reference: 226 and 902 Dispersion The requirements of TAS 226 and 902 are applicable to fixed or built-in...
-
ASTM
ASTM F 1292-99 Standard Specification for Impact Attenuation of Surface Systems Under and Around Playground Equipment (see 1008.2.6.2)....
