“Election Day Surveyors” or “EDSs” are City personnel (or contractors) who will review compliance at polling place locations where temporary measures are to be implemented on Election Day...
Search Results "Signage Location"
-
Definitions
-
4.26.2* Size and Spacing of Grab Bars and Handrails
Handrails may be located in a recess if the recess is a maximum of 3 in (75 mm) deep and extends at least 18 in (455 mm) above the top of the rail (see Fig. 39(d))....
-
Pit Toilet
A pit toilet may be permanently installed or may be moved from one location to another as the pit is filled or the area becomes severely impacted from use....
-
Van Spaces
Recommendation: Where accessible spaces are dispersed within a lot, consider providing van access at each location....
-
4.4.1 General
In alterations, where a condition for exception in section 1.1 prohibits full compliance with a specific requirement for clear floor or ground space surface, slope, size, or location, the...
-
Pit Toilet
A pit toilet may be permanently installed or may be moved from one location to another as the pit is filled or the area becomes severely impacted from use. ...
-
11B-411.2.1.6 Identification of floors served
In buildings with two or more elevator banks, each serving a different group of specific floors, hall call consoles located on floors with a building entry, including parking and transfer...
-
Attachment B
Element Identified in Attachments X, X, and X to the Consent Decree: Description of Element: Location of Element: ____________________ Date _________________________________...
-
1009.2.1 Elevators required
throughout with an automatic sprinkler system installed in accordance with Section 903.3.1.1 or 903.3.1.2, the elevator shall not be required on floors provided with a horizontal exit and located...
-
11B-809.10.7.1 Floor space
Exception: The 48-inch (1219 mm) minimum clear width may be reduced to 36 inches (914 mm) minimum for lavatories, cabinets, wing walls, or privacy walls located immediately adjacent to a...
-
1009.2.1 Elevators required
throughout with an automatic sprinkler system installed in accordance with Section 903.3.1 or 903.3.1.2, the elevator shall not be required on floors provided with a horizontal exit and located...
-
1009.4.2 Area of refuge
Areas of refuge are not required at elevators not required to be located in a shaft in accordance with Section 712....
-
11B-411.2.1.6 Identification of floors served
In buildings with two or more elevator banks, each serving a different group of specific floors, hall call consoles located on floors with a building entry, including parking and transfer...
-
Expert Report of Douglas J. Anderson, RAS, CASP, LCM Architects (August 8, 2018)
Building Entrance: The inaccessible entrance lacks signage directing voters to the accessible entrance (1991 ADA Stds 4.1.2(7)(c); 2010 ADA Stds 216.6)....
-
Transfer Devices for Use with Amusement Rides: ADA Standard Section 1002.6
Where possible, designers are encouraged to locate the transfer device seat no higher than 17 to 19 inches 430 to 485 mm) above the load and unload surface....
-
Outdoor Developed Areas: ADA Standard Section 9.
Review the updated information on the revisions to the ADA Standards regarding outdoor developed areas.
-
11B-809.10.7.3 Reinforcement for grab bars
Where the water closet is located adjacent to lavatories, cabinets, wing walls, or privacy walls the grab bar reinforcement shall be 36 inches (914 mm) in length....
-
11B-233.3.1.2.6.1 Single building with one common (lobby) entrance
The following may only be used for determining required access to multifamily dwelling units, in a single building with one common (lobby) entrance, located on a site with difficult terrain...
-
11B-1002.6 Transfer devices for use with amusement rides
Where possible, designers are encouraged to locate the transfer device seat no higher than 17 to 19 inches (430 to 485 mm) above the load and unload surface....
-
11B-809.10.7.3 Reinforcement for grab bars
Where the water closet is located adjacent to lavatories, cabinets, wing walls, or privacy walls the grab bar reinforcement shall be 36 inches (914 mm) in length....
-
11B-1002.6 Transfer devices for use with amusement rides
Where possible, designers are encouraged to locate the transfer device seat no higher than 17 to 19 inches (430 to 485 mm) above the load and unload surface....
-
1007.2.1 Elevators required
throughout with an automatic sprinkler system installed in accordance with Section 903.3.1.1 or 903.3.1.2, the elevator shall not be required on floors provided with a horizontal exit and located...
-
Overlapping Clear Floor Space
Comments recommended that this provision be revised to recognize that a seat may not always be located in a roll-in shower. Response....
-
11B-809.1 General
When located within public housing facilities, residential dwelling units shall comply with Section 11B-809....