A section of seating is removed from the side(s) for ADA COMPLIANT wheelchair accessibility right in the middle of activities. ...
Search Results "Section 505"
Commonly Searched Documents
- Pilot Rock UT Series Side Accessible Picnic Table Using Aluminum
- TownSteel MSE-32-II Classroom Intruder with Indicator on Inside Mechanical Mortise
- ADA Veracity ADA Pro Application
- AccessRec PathMat Temporary ADA Beach Access Mat
- Pilot Rock XT Series Side Accessible Picnic Table Using Recycled Plastic
-
1005.2.1 Height
EXCEPTION: Where a guard complying with sections 1003.2.12.1 and 1003.2.12.2 of the International Building Code (2000 edition) or sections 1012.2 and 1012.3 of the International Building...
-
224.6 Places of Lodging
Places of lodging shall comply with the requirements for transient lodging guest rooms in sections 224 and 806....
-
11B-306.3.1 General
Space under an element between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground shall be considered knee clearance and shall comply with Section 11B-306.3....
-
1017.3 Aisles in Groups B and M
In Group B and M occupancies, the minimum clear aisle width shall be determined by Section 1005.1 for the occupant load served, but shall not be less than 36 inches (914 mm)....
-
607 Bathtubs
Specifications for bathtubs in section 607 address clear floor space, seats, grab bars, operable parts, shower spray units, and enclosures....
-
§104.23(c)(1)
(1) Effective as of January 18, 1991, design, construction, or alteration of buildings in conformance with sections 3-8 of the Uniform Federal Accessibility Standards (UFAS) (Appendix A...
-
12188(a)(2) Injunctive relief
(2) Injunctive relief In the case of violations of sections 12182(b)(2)(A)(iv) and Section 12183(a) of this title, injunctive relief shall include an order to alter facilities to make...
-
§ 36.105(d)(3)(iv)
(iv) Given the rules of construction set forth in this section, it may often be unnecessary to conduct an analysis involving most or all of the facts related to condition, manner, or duration...
-
4.1.7(2)(a)(i)
(i) Section 106 Process....
-
5.3.1 General
All pit toilets shall comply with section 5.3 and be connected to an ORAR complying with section 2.0. ...
-
F247.3 Trailheads
This section requires at least 20 percent, but not less than one, of each type of outdoor constructed feature provided within trailheads to comply with the applicable technical requirements...
-
5.3.1 General
All pit toilets shall comply with section 5.3 and be connected to an ORAR complying with section 2.0....
-
Appendix C to Part 35—Guidance to Revisions to ADA Title II and Title III Regulations Revising the Meaning and Interpretation of the Definition of ‘‘Disability’’ and Other Provisions in Order To Incorporate the Requirements of the ADA Amendments Act
Interpretation of the Definition of ‘‘Disability’’ and Other Provisions in Order To Incorporate the Requirements of the ADA Amendments Act Note: This appendix contains guidance providing a section-by-section...
-
§ 35.108(d)(3)(iv)
(iv) Given the rules of construction set forth in this section, it may often be unnecessary to conduct an analysis involving most or all of the facts related to condition, manner, or duration...
-
§ 37.107(c)
(c) Compliance with paragraph (b) of this section is not required to the extent that it would significantly alter the historic or antiquated character of a historic or antiquated rail passenger...
-
§ 38.125(d)(1) Requirements
required to be accessible by §§38.111 (a) and (e) of this subpart shall provide at least one, but not more than two, mobility aid seating location(s) complying with paragraph (d)(2) of this section...
-
11B-812.5.4 Arrangement
Ambulatory EVCS shall not be required to comply with Section 11B-812.5.4. 2....
-
11B-306.3.1 General
Space under an element between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground shall be considered knee clearance and shall comply with Section 11B-306.3. ...
-
1132A.5.2 Strike edge maneuvering space at doors
The width of the level area at the exterior side of the primary entry door and any required exit doors shall comply with Section 1126A....